5. The program will strobe the fixture(s) for 30 seconds and then it
6. The display will indicate the fixtures and the status of the
Note: the dongle software provides bi-directional upload communication
Another Studio Spot
This procedure is covered in "Crossloading Fixtures" on page 3-25.
A-16 Studio Spot User's Manual
will start the upload. Optionally, you may press <
run the upload or <
download.
with Studio Spot fixtures. If any error messages are received, refer
to "Upload Troubleshooting" on page A-8.
> to quit the program.
Q
> to instantly
R