Dmx Starting Channel Mode; Dmx Starting Channels - High End Systems studio spot User Manual

4. Using the up and down keys, set the fixture number from F 0 1 to
F 2 1 . The display will flash when it is moved from the stored value.
5. Press <
ENTER
flashing.
Note: if < > is not pressed, the unit will not store the fixture number.
ENTER
6. Press <
MENU

DMX Starting Channel Mode

To address Studio Spot by DMX starting channel, complete the following
procedure:
1. Press and hold <
2. Using the up and down keys, scroll to the S E T field and press
< >.
ENTER
3. Using the up and down keys, scroll to the C H N L field and press
< >.
ENTER
4. Using the up and down keys, scroll to the d M X field and press
< >. Press <
ENTER
(address) field.
5. Press <
ENTER
6. Using the up and down keys, set a starting channel from C 0 0 1 to
C 4 8 9 . Refer to Table 1.2 for assistance. The display will flash when
it is moved from the stored value.
DMX
Fixture
Starting
#
Channel
1
2 25
3 49
4 73
5 97
6 121
7 145
Caution: if an incorrect address is given, channels could overlap and produce
erratic results.
> to store the fixture number. The display will stop
> to exit the menu.
> until the display changes to A d d R .
MENU
> twice to back out to the A d d R
MENU
> to address the fixture.
Table 1.2: DMX Starting Channels
Fixture
Starting
#
Channel
1 8
9
10
11
12
13
14
DMX
Fixture
#
169 15
193 16
217 17
241 18
265 19
289 20
313 21
Chapter 1 Installation and Setup 1-11
DMX
Starting
Channel
337
361
385
409
433
457
481