Safety Switches - wsm L3301 Workshop Manual

L3301, L3901, L4701, WSM

(2) Safety Switches

[A] Shuttle Switch (Manual Transmission Model)
[B] HST Pedal Switch (HST Model)
Shuttle Switch (Manual Transmission Model)
1. Remove connector of shuttle switch (1).
2. Measure the resistance across two terminals of the connector.
3. If measurement is different from following table, replace it.
When switch is pushed
Resistance (Across
switch terminal)
When switch is released
(1) Shuttle Switch
HST Pedal Switch (HST Model)
1. Remove connector of HST pedal switch (1).
2. Measure the resistance across two terminals of the connector.
3. If measurement is different from following table, replace it.
When switch is pushed
Resistance (Across
switch terminal)
When switch is released
(1) HST Switch
9-S27
ELECTRICAL SYSTEM
0 Ω
Infinity
[A] Shuttle Switch Side Connector 2P
9Y1211012ELS0031US0
0 Ω
Infinity
9Y1211012ELS0032US0
KiSC issued 09, 2016 A