wsm L3301 Workshop Manual page 395

L3301, L3901, L4701, WSM
(Continued)
4. Remove the Hi-Lo gear shaft assembly (3).
5. Remove the Hi-Lo gear fork rod (2) and the front wheel drive
shift lever (4).
(1) Pinion Gear Shaft Assembly
(2) Hi-Lo Gear Shift Fork Rod
Differential Lock Shift Fork
1. Tap out the left side spring pin (4).
2. Remove the cotter pin and remove the clevis pin (3).
3. Draw out the differential lock fork shaft (1) and remove the
differential lock shift fork (2).
(When reassembling)
• Apply grease to the left and right oil seals on the transmission
case.
• Insert the clevis pin (3) form the top and install the washer and
cotter pin.
• Tap in the spring pin (4) so that its split portion a may face
outward as shown in the figure.
(1) Differential Lock Fork Shaft
(2) DIfferential Lock Shift Fork
(3) Clevis Pin
(4) Spring Pin
3-S83
TRANSMISSION
(3) Hi-Lo Gear Shaft Assembly
(4) Front Wheel Drive Shift Lever
9Y1211012TRS0101US0
a: Split Portion
9Y1211012TRS0102US0
KiSC issued 09, 2016 A