Table of Contents
Advertisement
L3301, L3901, L4701, WSM
CARE OF DANGER, WARNING AND CAUTION LABELS
1. Keep danger, warning and caution labels clean and free from obstructing material.
2. Clean danger, warning and caution labels with soap and water, dry with a soft cloth.
3. Replace damaged or missing danger, warning and caution labels with new labels.
4. If a component with danger, warning and caution label(s) affixed is replaced with new part, make sure new label(s)
is (are) attached in the same location(s) as the replace component.
5. Mount new danger, warning and caution labels by applying on a clean dry surface and pressing any bubbles to
outside edge.
I-9
INFORMATION
9Y1211012INI0007US0
9Y1211012INI0004US0
KiSC issued 09, 2016 A
Advertisement
Chapters
Table of Contents
Troubleshooting
