L3301, L3901, L4701, WSM
[B] Mid Case
PTO Clutch Valve and PTO Clutch Holder
1. Remove PTO clutch valve (1).
2. Remove PTO clutch holder (6) together with PTO clutch pack
(5) by using two jack screw M8 to the holes "A" of the PTO
clutch holder (6).
3. Tap out other shafts
(When reassembling)
• Apply a small amount of transmission fluid to the O-ring.
• Install oil pipe (2) to the side hole of PTO clutch holder (6) firmly.
PTO clutch valve mounting
screw
Tightening torque
PTO clutch holder
mounting screw
(1) PTO Clutch Valve
(2) Oil Pipe
(3) Bolt (M8)
(4) Mid Case
3-S78
TRANSMISSION
23.5 to 27.4 N·m
2.4 to 2.8 kgf·m
17.4 to 20.2 lbf·ft
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
57.1 to 66.5 lbf·ft
(5) PTO Clutch Pack
(6) PTO Clutch Holder
A:
Portion to Use Jack Bolt (M 8)
9Y1211012TRS0096US0
KiSC issued 09, 2016 A