wsm L3301 Workshop Manual page 627

L3301, L3901, L4701, WSM
[C] PTO Switch
PTO Switch (L3301/L3901)
1. Remove connector of PTO switch (1).
2. Measure the resistance across two terminals of the connector.
3. If measurement is different from following table, replace it.
When switch is pushed
Resistance (Across
switch terminal)
When switch is released
(1) PTO Switch
PTO Switch (L4701)
1. Remove connector of PTO switch (1).
2. Measure the resistance across two terminals of the connector
referring table.
3. If measurement is different from following table, replace it.
When
switch is
released
Resistance (Across
switch terminal)
When
switch is
pushed
(1) PTO Switch
9-S28
ELECTRICAL SYSTEM
0 Ω
Infinity
[A] Manual Transmission Model
[B] HST Model
[a] PTO Switch Side Connector 2P
9Y1211012ELS0033US0
NO Terminal –
Infinity
COM Terminal
NC Terminal –
0 Ω
COM Terminal
NO Terminal –
0 Ω
COM Terminal
NC Terminal –
Infinity
COM Terminal
[A] PTO Switch Side Connector 2P
9Y1211012ELS0034US0
KiSC issued 09, 2016 A