wsm L3301 Workshop Manual page 375

L3301, L3901, L4701, WSM
Hydraulic Pipes and Electrical Wiring (Under Fuel Tank Base
and Left Side)
1. Disconnect the injector connectors (5).
2. Disconnect the glow plug (4).
3. Disconnect the EGR valve (3) connector.
4. Disconnect the air flow sensor (2) connector.
5. Disconnect the rail pressure sensor (6) connector.
6. Remove the slow blow fuses (1).
7. Disconnect the coolant temperature sensor (7) connector.
8. Disconnect the DPF temperature sensors (8).
9. Disconnect the alternator (12).
10. Disconnect the starter (9).
11. Disconnect the oil switch (11).
12. Remove the HST return pipe (10).
Tightening torque HST return pipe bolt
(1) Slow Blow Fuse
(2) Air Flow Sensor
(3) EGR Valve
(4) Glow Plug
(5) Injector Connector
(6) Rail Pressure Sensor
(7) Coolant Temperature Sensor
(8) DPF Temperature Sensor
3-S63
TRANSMISSION
79.2 to 88.2 N·m
8.1 to 9.0 kgf·m
58.4 to 65.1 lbf·ft
(9) Starter
(10) HST Return Pipe
(11) Oil Switch
(12) Alternator
(13) HST Return Pipe
[A] L3301/L3901
[B] L4701
9Y1211012CLS0008US0
KiSC issued 09, 2016 A