wsm L3301 Workshop Manual page 524

L3301, L3901, L4701, WSM
Valve Assembly
1. Remove the valve housing mounting screws.
2. Remove the valve assembly (1) and ball nut (2).
(When reassembling)
• Apply oil to O-ring and oil seal.
Valve housing mounting
Tightening torque
screw
(1) Valve Assembly
Ball Nut Assembly
1. Remove the lock nut (1).
2. Remove the ball nut assembly (2).
(When reassembling)
• Apply oil to sleeve.
Tightening torque Lock nut
(1) Lock Nut
Relief Valve
1. Loosen the lock nut (5) and remove the adjusting screw (4).
2. Remove the spring (2) and poppet (1).
(When reassembling)
• Apply grease to O-ring (3).
• Be sure to adjust the relief valve pressure. (See page 7-S9.)
Tightening torque Lock nut
(1) Poppet
(2) Spring
(3) O-ring
7-S15
STEERING
48 to 55 N·m
4.9 to 5.7 kgf·m
36 to 41 lbf·ft
(2) Ball Nut
9Y1211012STS0020US0
88.3 to 107 N·m
9.0 to 11.0 kgf·m
65.1 to 79.5 lbf·ft
(2) Ball Nut Assembly
9Y1211012STS0021US0
49 to 78 N·m
5.0 to 8.0 kgf·m
37 to 57 lbf·ft
(4) Adjusting Screw
(5) Lock Nut
9Y1211012STS0022US0
KiSC issued 09, 2016 A