4Wd Model - wsm L3301 Workshop Manual

L3301, L3901, L4701, WSM

[2] 4WD MODEL

Clearance between Differential Case (Differential Case Cover)
and Differential Side Gear
1. Measure the differential side gear O.D..
2. Measure the differential case bore I.D. and calculate the
clearance.
3. Measure the differential case cover bore I.D. and calculate the
clearance.
4. If the clearance exceeds the allowable limit, replace damaged
parts.
Clearance between
Factory specification
differential case
(differential case cover)
Allowable limit
and differential side gear
Differential case bore
Factory specification
I.D.
Differential case cover
Factory specification
bore I.D.
Differential side gear
Factory specification
O.D.
Clearance between Pinion Shaft and Differential Pinion
1. Measure the pinion shaft O.D..
2. Measure the differential pinion I.D. and calculate the clearance.
3. If the clearance exceeds the allowable limit, replace damaged
parts.
Factory specification
Clearance between
pinion shaft and
differential pinion
Allowable limit
Pinion shaft O.D. Factory specification
Differential pinion I.D. Factory specification
6-S28
FRONT AXLE
0.050 to 0.151 mm
0.00197 to 0.00594 in.
0.20 mm
0.0079 in.
32.000 to 32.062 mm
1.25984 to 1.26228 in.
32.000 to 32.025 mm
1.25984 to 1.26083 in.
31.911 to 31.950 mm
1.25634 to 1.25787 in.
9Y1211012FAS0041US0
0.064 to 0.100 mm
0.00252 to 0.00394 in.
0.25 mm
0.0096 in.
13.950 to 13.968 mm
0.54921 to 0.54992 in.
14.032 to 14.050 mm
0.55244 to 0.55315 in.
9Y1211012FAS0042US0
KiSC issued 09, 2016 A