Disassembling Steering Gear Box - wsm L3301 Workshop Manual

L3301, L3901, L4701, WSM

(3) Disassembling Steering Gear Box

Pitman Arm
1. Turn the input shaft clockwise and counterclockwise several
time to drain oil from gear box.
2. Secure the power steering gear box with a vise.
3. Remove the nut and spring washer.
4. Remove the pitman arm (1) with puller.
(When reassembling)
• Install the pitman arm to the sector shaft, aligning their aligning
marks (2).
Tightening torque Pitman arm mounting nut
(1) Pitman Arm
Side Cover
1. Loosen the lock nut (1).
2. Remove the side cover mounting screws, turn the adjusting
screw clockwise, and remove the side cover (2).
(When reassembling)
Lock nut
Tightening torque
Side cover mounting screw
(1) Lock Nut
Sector Gear Shaft
1. Remove the sector gear shaft (1) from the side cover.
(1) Sector Gear Shaft
7-S14
STEERING
147 to 196 N·m
15.0 to 20.0 kgf·m
109 to 144 lbf·ft
(2) Aligning Mark
9Y1211012STS0017US0
59 to 78 N·m
6.0 to 8.0 kgf·m
44 to 57 lbf·ft
20 to 29 N·m
2.0 to 3.0 kgf·m
15 to 21 lbf·ft
(2) Side Cover
9Y1211012STS0018US0
9Y1211012STS0019US0
KiSC issued 09, 2016 A