Steering Controller - wsm L3301 Workshop Manual

Hide thumbs Also See for L3301:

Table of Contents

L3301, L3901, L4701, WSM

(2) Steering Controller

Battery Negative Cable Terminal

1. Open the bonnet.

2. Disconnect the battery negative cable terminal connector (1).

(1) Battery Negative Terminal

Steering Wheel and Rear Bonnet

1. Remove steering wheel cap (1).

2. Remove steering wheel nut (5).Remove steering wheel (2) with

steering puller.

3. Remove the throttle grip (3).

4. After disconnecting connectors for key switch and combination

switch, remove the rear bonnet (4).

Steering wheel nut

Tightening torque

Rear bonnet mounting bolt

(1) Steering Wheel Cap

(2) Steering Wheel

(3) Throttle Grip

Steering Post Assembly

1. Remove steering post assembly (1).

(1) Steering Post Assembly

9Y1211012STS0035US0

48.0 to 55.9 N·m

4.9 to 5.7 kgf·m

36 to 41 lbf·ft

0.4 to 0.6 kgf·m

3 to 4 lbf·ft

(4) Rear Bonnet

(5) Steering Wheel Nut

9Y1211012STS0036US0

9Y1211012STS0037US0

KiSC issued 09, 2016 A

Table of Contents