Flywheel And Crankshaft - wsm L3301 Workshop Manual

Hide thumbs Also See for L3301:

Table of Contents

L3301, L3901, L4701, WSM

[10] FLYWHEEL AND CRANKSHAFT

1. Attach the stopper to the flywheel (1).

2. Remove 2 flywheel screws (2).

3. Put the 2 flywheel guide screws (3) in the holes.

4. Remove all the flywheel screws (2).

5. Remove the flywheel (1) slowly along the flywheel guide screws

• Do not use an impact wrench. Serious damage will occur.

• The flywheel is very heavy, so securely hold the flywheel

when removing.

(When reassembling)

• Put in 2 flywheel guide screws (3).

• Check that there are no metal particles that remain on the

flywheel mounting surfaces.

• Apply engine oil to the threads and the flange seat face of the

flywheel screw. Then attach the screw.

Tightening torque

Flywheel screw

(1) Flywheel

(2) Flywheel Screw

98.1 to 107 N·m

10.0 to 11.0 kgf·m

72.4 to 79.5 lbf·ft

(3) Flywheel Guide Screw

9Y1211012ENS0062US0

KiSC issued 09, 2016 A

Table of Contents