wsm L3301 Workshop Manual page 107

L3301, L3901, L4701, WSM
Valve Guide Replacing Tool
Application
• To press out and press fit the valve guide.
A 225 mm (8.86 in.)
B 70 mm (2.8 in.)
C 45 mm (1.8 in.)
D 20 mm dia. (0.79 in. dia.)
E 12.7 to 12.9 mm dia. (0.500 to 0.507 in. dia.)
F 7.50 to 7.60 mm dia. (0.296 to 0.299 in. dia.)
G 25 mm dia. (0.98 in. dia.)
H 7.70 to 8.00 mm dia. (0.304 to 0.314 in. dia.)
I 5 mm (0.2 in.)
J 20 mm dia. (0.79 in. dia.)
K 13.5 to 13.8 mm dia. (0.532 to 0.543 in. dia.)
L 8.90 to 9.10 mm (0.351 to 0.358 in.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
C0.3 Chamfer 0.3 mm (0.01 in.)
Bushing Replacing Tools
Application
• To press out and press fit the bushing.
1) For small end bushing
A 162 mm (6.38 in.)
B 35 mm (1.4 in.)
C 27 mm (1.1 in.)
D 35 mm dia. (1.4 in. dia.)
E 27.90 to 27.95 mm dia. (1.099 to 1.100 in. dia.)
F 25.00 to 25.01 mm dia. (0.9843 to 0.9846 in. dia.)
2) For idle gear bushing
A 175 mm (6.89 in.)
B 40 mm (1.6 in.)
C 38 mm (1.5 in.)
D 45 mm dia. (1.8 in. dia.)
E 41.90 to 41.95 mm dia. (1.650 to 1.651 in. dia.)
F 37.950 to 37.970 mm dia. (1.4941 to 1.4948 in. dia.)
Flywheel Stopper
Application
• To loosen and tighten the flywheel screw.
A 20 mm (0.79 in.)
B 15 mm (0.59 in.)
C 10 mm dia. (0.39 in. dia.)
D 30 mm (1.2 in.)
E 8 mm (0.3 in.)
F 200 mm (7.87 in.)
G-83
GENERAL
9Y1211012GEG0012US0
9Y1211012GEG0013US0
9Y1211012GEG0014US0
KiSC issued 09, 2016 A