Lighting Switches And Flasher Unit; Combination Switch (Rops Model) - wsm M6040 Workshop Manual

M6040, M7040, WSM

[8] LIGHTING SWITCHES AND FLASHER UNIT

(1) Combination Switch (ROPS Model)

Ground PTO Switch (ITA Model)
1) Ground PTO Switch Continuity
1. Check the continuity with an ohmmeter across the switch
connector (2).
2. If it does not conduct or any value is indicated when the switch
is pushed, the switch is faulty.
3. If infinity is not indicated when the switch is released, the switch
is faulty.
Resistance
Reference
(Across switch
value
terminals)
(1) Ground PTO Switch
(2) Connector
Checking Connector Voltage
1. Disconnect the combination switch connector.
2. Measure the voltage with voltmeter across the connector
terminal B1 and chassis, across the terminal B2 and chassis,
across the terminal B3 and chassis.
3. If the voltage differs from the battery voltage, the wiring harness,
fuses or main switch faulty.
Main
switch at
"ON"
Voltage
Main
switch at
"OFF"
(1) Combination Switch
9-S36
ELECTRICAL SYSTEM
When switch is pushed "P" 0 Ω
When switch is released
Infinity
"R"
P: Pushed
R: Released
9Y1210143ELS0097US0
Terminal B1 –
Chassis
Approx. battery voltage
Terminal
B2/B3 –
Chassis
(2) Combination Switch Connector
(Wire Harness Side)
9Y1210143ELS0058US0
KiSC issued 07, 2012 A