wsm L3301 Workshop Manual page 59

L3301, L3901, L4701, WSM
Adjusting Toe-in
1. Park tractor on a flat place.
2. Turn steering wheel so front wheels are in the straight ahead
position.
3. Lower the implement, lock the park brake and stop the engine.
4. Measure distance between tire beads at front of tire, at hub
height.
5. Measure distance between tire beads at rear of tire, at hub
height.
6. Front distance should be shorter than rear distance. If not,
adjust tie rod length.
Toe-in ((B) - (A)) Factory specification
 Adjusting procedures
1. Loosen the lock nut and turn the turnbuckle to adjust the rod
length until the proper toe-in measurement is obtained.
2. Retighten the lock nut.
Tightening torque Tie-rod lock nut
(1) Lock Nuts
(2) Turnbuckle
(3) Tie-rod
[A]) 2WD
[B] 4WD
G-35
GENERAL
2 to 8 mm
0.08 to 0.31 in.
112.7 to 122.5 N·m
11.5 to 12.5 kgf·m
83.2 to 90.4 lbf·ft
(A) Wheel to wheel distance at front
(B) Wheel to wheel distance at rear
(C) Front
9Y1211012GEG0091US0
KiSC issued 09, 2016 A