wsm L3301 Workshop Manual page 352

L3301, L3901, L4701, WSM
Synchro-shuttle Gear Assembly
1. Remove the shuttle lever stopper screw (1).
2. Remove the bearing holder (3) with synchro-shuttle assembly.
(When reassembling)
• Reinstall the synchronizer keys (17) in the key grooves of the
synchronizer rings (16) firmly.
Bearing holder mounting
Tightening torque
screw
(1) Screw
(2) Shuttle Lever Arm
(3) Bearing Holder
(4) Shuttle Shaft
(5) External Circlip
(6) Shuttle Washer
(7) 22T Gear
(8) Ball Bearing
(9) 22T-23T Shuttle Gear Shaft
(10) Ball Bearing
(11) Coupling
(12) Ball Bearing
(13) Thrust Collar
(14) Needle Bearing
(15) 21T Gear
3-S40
TRANSMISSION
48 to 55 N·m
4.9 to 5.7 kgf·m
36 to 41 lbf·ft
(16) Synchronizer Ring
(17) Synchronizer Key
(18) Syncho Key Spring
(19) Shuttle Coupling
(20) Shuttler Shifter
(21) Syncho Key Spring
(22) External Circlip 32
(23) Synchronizer Ring
(24) 22T Gear
(25) Needle Bearing
(26) Thrust Collar
(27) Ball Bearing
(28) Washer
(29) External Circlip
(30) Mid Case
9Y1211012TRS0037US0
KiSC issued 09, 2016 A