Lighting Switches And Flasher Unit; Combination Switch (Rops Model) - wsm M7060 Workshop Manual

M6060, M7060, WSM

[12] LIGHTING SWITCHES AND FLASHER UNIT

(1) Combination Switch (ROPS Model)

Checking Connector Voltage
1. Disconnect the combination switch connector.
2. Measure the voltage with voltmeter across the connector
terminal B1 and chassis, across the terminal B2 and chassis.
3. If the voltage differs from the battery voltage, the wiring harness,
fuses or main switch faulty.
Main switch at
"ON"
Voltage
Main switch at
"OFF"
(1) Combination Switch
Checking Light Switch and Turn Signal Switch
1. Test the continuity through the switch with an ohmmeter.
(1) Turn Signal Switch
(2) Combination Switch
(3) Horn Switch
(4) Light Switch
(5) Combination Switch Connector
(Switch Side)
8-S46
ELECTRICAL SYSTEM
Terminal B1 –
Chassis
Approx. battery
voltage
Terminal B2 –
Chassis
(2) Combination Switch Connector
(Wire Harness Side)
9Y1210828ELS0084US0
(a) Right Turn
(b) OFF
(c) Left Turn
(d) OFF
(e) Head Light (Lo)
(f) Head Light (Hi)
(g) Free
(h) Push
9Y1210828ELS0085US0
KiSC issued 08, 2013 A