Handling Precautions For Electrical Parts And Wiring; Wiring - wsm L3301 Workshop Manual

L3301, L3901, L4701, WSM
3. HANDLING PRECAUTIONS FOR ELECTRICAL
PARTS AND WIRING

[1] WIRING

To ensure safety and prevent damage to the machine and
surrounding equipment, obey the following precautions in handling
electrical parts and wiring.
IMPORTANT
• Check electrical wiring for damage and loosened
connection every year. To this end, educate the customer
to do his or her own check and at the same time
recommend the dealer to perform periodic check for a fee.
• Do not try to modify or remodel any electrical parts and
wiring.
• When removing the battery cables, disconnect the negative
cable first. When installing the battery cables, connect the
positive cable first.
(1) Negative Terminal
• After installing wiring, check protection of terminals and
clamped condition of wiring.
(1) Cover
(Securely Install Cover)
• Securely tighten wiring terminals.
(1) Correct
(Securely Tighten)
• Do not let wiring contact dangerous part.
(1) Dangerous Part (Sharp Edge)
(2) Wiring (Incorrect)
G-5
GENERAL
(2) Positive Terminal
WSM000001GEG0062US0
WSM000001GEG0070US0
(2) Incorrect
(Loosening Leads to damaged
Contact)
WSM000001GEG0063US0
(3) Wiring (Correct)
(4) Dangerous Part
WSM000001GEG0064US0
KiSC issued 09, 2016 A