Disassembling And Assembling; Outer Parts; Egr - wsm L3301 Workshop Manual

L3301, L3901, L4701, WSM

6. DISASSEMBLING AND ASSEMBLING

[1] OUTER PARTS

[2] EGR

Outer Parts
1. Remove starter motor (1).
2. Remove hydraulic pump (2) with pump holder and regulator
valve (L4701 only).
(1) Starter Motor
EGR Related Parts
1. Remove EGR cooler hose (1).
2. Remove EGR pipe (2).
3. Remove EGR cooler (3).
(1) EGR Cooler Hose
(2) EGR Pipe
Intake Throttle Valve
1. Remove the air cleaner flange (1).
2. Remove the intake throttle valve (2).
NOTE
• Do not disassemble the intake throttle valve.
(When reassembling)
• Replace the gaskets with new ones.
(1) Air Cleaner Flange
EGR Valve
1. Disconnect the cooler pipe of EGR valve.
2. Remove the EGR valve (1).
NOTE
• Do not disassemble the EGR valve assembly.
(When reassembling)
• Replace the gaskets with new ones.
(1) EGR Valve
1-S39
ENGINE
(2) Hydraulic Pump
9Y1211012ENS0030US0
(3) EGR Cooler
9Y1211012ENS0031US0
(2) Intake Throttle Valve
9Y1211012ENS0032US0
9Y1211012ENS0033US0
KiSC issued 09, 2016 A