wsm L3301 Workshop Manual page 104

Hide thumbs Also See for L3301:

Table of Contents

L3301, L3901, L4701, WSM

• 07909-30241

• Use to check the oil clearance between crankshaft and bearing,

Measuring range

• Green: 0.03 to 0.07 mm (0.001 to 0.003 in.)

• Red: 0.05 to 0.1 mm (0.002 to 0.006 in.)

• Blue: 0.1 to 0.2 mm (0.004 to 0.009 in.)

• 07909-31371

• Use to check cracks on cylinder head, cylinder block, etc..

Socket Wrench for Crank Pulley Nut (46 mm Deep Socket

• Use to loosen and tighten the fan drive pulley mounting nut.

• The special tool is not available, so make it. Refer to the

100 mm (3.94 in.)

25.0 mm (0.98 in.)

27.0 mm (1.06 in.)

45.0 mm dia. (1.77 in. dia.)

35.0 mm dia. (1.38 in. dia.)

62.5 mm dia. (2.46 in. dia.)

46.0 mm (1.81 in.)

WSM000001GEG0022US0

WSM000001GEG0023US0

9Y1211012GEG0010US0

KiSC issued 09, 2016 A

Chapters

Table of Contents