wsm L3301 Workshop Manual page 472

L3301, L3901, L4701, WSM
Front Wheel Steering Angle [4WD]
1. Inflate the tires to the specified pressure.
2. Steer the wheels to the extreme right until the front gear case
(1) contacts with the bevel gear case (2) at right hand side of the
front axle.
3. If the front gear case (1) can not be contacted with the bevel
gear case (2), shorten the length of stopper (3).
4. Keeping the front gear case (1) contact with the bevel gear case
(2), make a specified clearance "A" as shown in the lower table.
5. After adjustment, secure the stopper with the lock nut (4).
6. For adjusting the left steering angle, perform the same
procedure as mentioned in right steering angle.
Clearance "A" between
bevel gear case and Factory specification
stopper
(1) Front Gear Case
(2) Bevel Gear Case
(3) Stopper
(4) Lock Nut
(5) Front Gear Case
6-S8
FRONT AXLE
2.0 mm
0.079 in.
A: Clearance
9Y1211012FAS0008US0
KiSC issued 09, 2016 A