wsm L3301 Workshop Manual page 196

L3301, L3901, L4701, WSM
Hydraulic Pipes, Steering Joint, and Electrical Wiring (Right
Side)
1. Remove the suction hose (1).
2. Remove the delivery pipe (3).
3. Remove the steering shaft (2).
4. Disconnect the crank shaft position sensor (9).
5. Disconnect the parking brake sensor.
6. Disconnect the fuel pump (4).
7. Disconnect the intake throttle valve (5).
8. Disconnect the rail pressure sensor (6).
9. Disconnect the supply pump (7) connector.
10. Disconnect the camshaft position sensor (8).
(When reassembling)
• Be sure that the steering joint shaft (2) does not contact with
both hydraulic pump and flywheel housing.
Delivery pipe joint bolt
Steering shaft universal
Tightening torque
joint bolt (L3301/L3901)
Steering bearing flange bolt
(L3301/L3901)
(1) Suction Hose
(2) Steering Joint Shaft (L3301/L3901)
(3) Delivery Pipe
(4) Fuel Pump
(5) Intake Throttle Valve
1-S33
ENGINE
49 to 69 N·m
5.0 to 7.0 kgf·m
37 to 50 lbf·ft
23.5 to 27.4 N·m
2.4 to 2.8 kgf·m
17.3 to 20.2 lbf·ft
23.5 to 27.4 N·m
2.4 to 2.8 kgf·m
17.3 to 20.2 lbf·ft
(6) Rail Pressure Sensor
(7) Supply Pump
(8) Camshaft Position Sensor
(9) Crank Shaft Position Sensor
9Y1211012ENS0024US0
KiSC issued 09, 2016 A