wsm L3301 Workshop Manual page 365

L3301, L3901, L4701, WSM
Trunnion
1. Remove the internal cir-clip (1) both side.
2. Remove the cover (2) and (4).
3. Remove the trunnion (3).
(When reassembling)
• Apply transmission oil to the O-ring.
NOTE
• Be careful not to damage the O-ring with cover (4).
(1) Internal Cir-clip
(2) Cover
(3) Trunnion
Charge Relief Valve
1. Remove the hex. head plug (1).
2. Remove the spring (2) and valve poppet (3).
(When reassembling)
• When replacing the valves, check and adjust the setting
pressure. (See page 3-S15.)
NOTE
• Be careful not to damage the O-ring.
Tightening torque Hex. head plug
(1) Hex. Head Plug
(2) Spring
3-S53
TRANSMISSION
(4) Cover
(5) Thrust Plate
9Y1211012TRS0059US0
31 to 37 N·m
3.1 to 3.8 kgf·m
23 to 27 lbf·ft
(3) Valve Poppet
9Y1211012TRS0060US0
KiSC issued 09, 2016 A