Monitor Lamp - wsm L3301 Workshop Manual

L3301, L3901, L4701, WSM

[12] MONITOR LAMP

Parking Brake Switch
1. Disconnect the connector from the parking brake switch (1) after
turning the main switch "OFF".
2. Measure the resistance across the two terminals of parking
brake switch following table below.
3. If measurement value is different from table, the parking switch
is damaged.
When switch is released
Resistance
When switch is pushed
(1) Parking Brake Switch
(2) Connector of Parking Brake Switch
Parking Brake Switch and Wiring Harness
1. Disconnect the connector from the parking brake switch after
turning the main switch "OFF".
2. Turn the main switch "ON" and connect a jumper lead between
the connector terminals of wiring harness.
3. If the parking brake indicator lamp does not light, the panel
circuit or wiring harness is damaged.
(1) Connector of Parking Brake Switch (2) Connector of Wiring Harness
9-S40
ELECTRICAL SYSTEM
0 Ω
Infinity
[A] L3301/L3901
[B[ L4701
9Y1211012ELS0065US0
9Y1211012ELS0066US0
KiSC issued 09, 2016 A