wsm L3301 Workshop Manual page 636

L3301, L3901, L4701, WSM
Checking Turn Signal Function
1. Measure the resistance with an ohmmeter across B3 terminal
and TR terminal, B3 terminal and TL terminal when turn signal
light switch is at "OFF" position.
2. Measure the resistance with an ohmmeter across B3 terminal
and TR terminal, B3 terminal and TL terminal when turn signal
light switch is at "RIGHT" position.
3. Measure the resistance with an ohmmeter across B3 terminal
and TR terminal, B3 terminal and TL terminal when turn signal
light switch is at "LEFT" position.
4. If measured value is different from table below, the combination
light switch is damaged.
Turn
signal light
switch at
"OFF"
position
Turn
signal light
Resistance switch at
"RIGHT"
position
Turn
signal light
switch at
"LEFT"
position
(1) 10P Connector
(Combination Light Switch)
9-S37
ELECTRICAL SYSTEM
B3 terminal –
Infinity
TR terminal
B3 terminal –
Infinity
TL terminal
B3 terminal –
0 Ω
TR terminal
B3 terminal –
Infinity
TL terminal
B3 terminal –
Infinity
TR terminal
B3 terminal –
0 Ω
TL terminal
[A] Connector (Switch Side)
9Y1211012ELS0058US0
KiSC issued 09, 2016 A