Sa (Spectrum Analyzer) Mode - Keysight N9913A User Manual

Keysight Handheld Analyzers
N99xxA User's Guide
9

SA (Spectrum Analyzer) Mode

To better reflect the enhancements implemented during the alignment
process, for firmware versions
referred to as "Channel Equalization" or "Channel Equalization Alignment"
(ChanEQ
SA Mode measures signals at the SA RF IN connector.
SA Mode measurements require NO calibration.
For a comprehensive SA mode tutorial, see Spectrum Analysis Basics (App
Note 150) at
For information on using the FieldFox Remote Viewer which enables you to
view the FieldFox from your iOS device, refer to
http://literature.cdn.keysight.com/litweb/pdf/5991-2938EN.pdf
Figure 9-1 SA Display with Markers
The graphic above shows an SA display with markers.
Carrier with 5 kHz frequency modulation and deviation of 1 kHz.
>
Alignment).
http://literature.cdn.keysight.com/litweb/pdf/5952-0292.pdf
143
A.10.15 "IF Flatness Alignment" is now