Camshaft Installation - Husqvarna TE 250 - 310 2011 I.E. Workshop Manual

ENGINE REASSEMBLY

Camshaft installation

Secure a dial gauge (1) to the spark plug hole.
Turn the crankshaft manually until bringing the piston to Top Dead Centre.
Refit intake camshaft (2) and exhaust camshaft (3) with the gears positioned as
shown in the figure.
Cover parting line "A" is visible through the holes (4).
Make sure that the bushings (5) are in place in the covers.
H.46 Ed. 07-2010