Removing The Camshaft; Removing The Cylinder Head - Husqvarna FE 350 2015 Repair Manual

ENGINE
18
18.3.12

Removing the camshaft

18.3.13

Removing the cylinder head

Pull out timing chain tensioner
O
Loosen screws from the outside to the inside and remove.
Take off guide rail fj .
Take off the camshaft bearing bridge.
Take the timing chain off the camshaft gear.
Remove the camshafts.
O
Remove nut with the washer.
Loosen nuts fj in a crisscross pattern and remove them with the washers.
Remove the cylinder head.
e.
CD.
Remove O-ring
141