Firmware Version 1.0.10.44; Firmware Version 1.0.10.39 - Grandstream Networks UCM6510 User Manual

•
Added PMS support. [PMS INTEGRATION]
•
Added call queue custom prompt support. [Configure Call Queue]
•
Added call queue retry time support. [Configure Call Queue]
•
Added support for DHCP Client List. [DHCP Client List]

Firmware Version 1.0.10.44

•
Added Zero Config DP750 support. [Model Templates]
•
Added Configure framing with "esf" or "d4" in T1/J1. [Table 56: Digital Hardware Configuration
Parameters: T1/J1 - PRI_NET/PRI_CPE]

Firmware Version 1.0.10.39

•
Added multiple modes support for inbound route. [Inbound Route: Multiple Mode]
•
Added option "Enable Inbound Multiple Mode", "Inbound Default Mode" and "Inbound Mode 1" for
switching inbound route mode via feature code. [Feature Codes]
•
Added prepending prefix for inbound route. [Inbound Route: Prepend Example]
•
Added multiple registration per extension. [Multiple Registrations per Extension]
•
Added SIP Message support. [SMS Message Support]
•
Added 100rel option for 100rel support. [Table 106: SIP Settings/ToS]
•
Added video preview support. [Table 97: Internal Options/Payload]
•
Added User Portal Page Fax sending support.
•
Added Fax intelligent routing. [Fax Intelligent Route]
•
Added Re-Invite with two media (audio, image) support for fax sending. [Fax with Two Media]
•
Added option "Max Concurrent Sending Fax" in Fax settings. [Configure Fax/T.38]
•
Added option "Fax Queue Length" in Fax settings. [Configure Fax/T.38]
•
Added Google Service Setting Support. [Google Service Settings Support]
•
Added Conference Schedule. [CONFERENCE SCHEDULE]
•
Added Setup Wizard. [Setup Wizard]
•
Added ability to customize specific prompt. [Customize Specific Prompt]
•
Added option "ALL" when making backup file. [Backup/Restore]
•
Added "Enable Destination" and "Default Destination" in Follow Me settings. [FOLLOW ME]
•
Added "Call Duration Limit" option in Web GUIPBXInternal OptionsGeneral. [PBX
Settings/General]
•
Added "Enable Auto E-mail Notification" option in Web GUIPBXInternal OptionsGeneral. [PBX
Settings/General]
•
Added options "ICE Support" and "STUN Server" in Web GUIPBXInternal OptionsRTP
Settings. [PBX Settings/RTP Settings]
•
Added payload type setting for VP8 in Web GUIPBXInternal OptionsPayload. [PBX
Settings/Payload]
•
Added options "External Host" and "Use IP address in SDP" in Web GUIPBXSIP SettingsNAT.
[SIP Settings/NAT]
UCM6510 IP PBX User Manual
P a g e | 27