Paging And Intercom Group; Configure Paging/Intercom Group; Table 67: Paging/Intercom Group Configuration Parameters; Figure 132: Paging/Intercom Group - Grandstream Networks UCM6202 User Manual

Paging and Intercom Group can be used to make an announcement over the speaker on a group of phones.
Targeted phones will answer immediately using speaker. The UCM6200 paging and intercom can be used
via feature code to a single extension or a paging/intercom group. This sections describes the configuration
of paging/intercom group under Web GUI->PBX->Call Features->Paging/Intercom.

Configure Paging/Intercom Group


Click on "Create New Paging/Intercom Group" to add paging/intercom group.
Name
Extension
Type
Custom Prompt
Page/Intercom Group
Members

PAGING AND INTERCOM GROUP

Figure 132: Paging/Intercom Group

Table 67: Paging/Intercom Group Configuration Parameters

Configure paging/intercom group name.
Configure the paging/intercom group extension.
Select "2-way Intercom" or "1-way Page".
This option is to set a custom prompt for a paging/intercom group to announce
to caller. Click on 'Prompt', it will direct to the page PBX->Internal Options-
>Custom Prompt, where users could record new prompt or upload prompt files.
Select available users from the left side to the paging/intercom group member
list on the right.
UMC6200 Series User Manual
P a g e | 201