Paging And Intercom Group; Configure Paging/Intercom Group; Table 38: Paging/Intercom Group Configuration Parameters; Figure 47: Paging/Intercom Group - Grandstream Networks UCM6510 User Manual

The UCM6510 paging and intercom can be used via feature code to a single extension or a paging/intercom
group. This sections describes the configuration of paging/intercom group under web GUI->PBX->Call
Features->Paging/Intercom.

CONFIGURE PAGING/INTERCOM GROUP


Click on "Create New Paging/Intercom Group" to add paging/intercom group.
Name
Extension
Type
Page/Intercom Group
Members

Click on to edit the paging/intercom group.
Firmware Version 1.0.0.5

PAGING AND INTERCOM GROUP

Figure 47: Paging/Intercom Group

Table 38: Paging/Intercom Group Configuration Parameters

Configure paging/intercom group name.
Configure the paging/intercom group extension.
Select "2-way Intercom" or "1-way Page".
Select available users from the left side to the paging/intercom group
member list on the right.
UCM6510 IP PBX User Manual Page 118 of 192