Batch Add Extensions; Table 21: Batch Add Extension Parameters - Grandstream Networks UCM6108 User Manual

http://arttel.ru
Codec Preference
Pickup Group

BATCH ADD EXTENSIONS

Under Web GUI->PBX->Basic/Call Routes->Extensions, click on "Batch Add Extensions" to start adding
extensions in batch.
General
Start Extension
Create Number
Permission
Enable Voicemail
SIP/IAX Password
Voicemail Password
Firmware Version 1.0.2.21
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102
Select audio and video codec for the extension. The available codecs
are: PCMU, PCMA, GSM, AAL2-G.726-32, G.722, G.729, G.723, ILBC,
ADPCM, LPC10, H.264, H.263 and H.263p.
Assign the extension to a pickup group. If the extension belongs to a
pickup group, any incoming calls to this extension can be picked up from
the other extensions in the same pickup group by dialing the call pickup
feature code (by default it's *8). By default the extension belongs to the
first pickup group.

Table 21: Batch Add Extension Parameters

Configure the starting extension number of the batch of extensions to be
added.
Specify the number of extensions to be added. The default setting is 5.
Assign permission level to the user. The available permissions are
"Internal", "Local", "National" and "International" from the lowest level to
the highest level. The default setting is "Internal".
Note:
Users need to have the same level as or higher level than an outbound
rule's privilege in order to make outbound calls from this rule.
Enable Voicemail for the user. The default setting is "Yes".
Configure the SIP/IAX password for the users. Three options are
available to create password for the batch of extensions.
User Random Password.
x
A random secure password will be automatically generated. It is
recommended to use this password for security purpose.
Use Extension as Password.
x
Enter a password to be used on all the extensions in the batch.
x
Configure Voicemail password (digits only) for the users.
User Random Password.
x
A random password in digits will be automatically generated. It is
UCM6100 Series IP PBX User Manual Page 57 of 159