Large Scale Nat (Lsn) Accounting; Table 59: Lsn Accounting (Description) - Alcatel-Lucent 7750 Reference Manual

Large Scale NAT (LSN) Accounting

Large Scale NAT (LSN) Accounting

Table 59: LSN Accounting (description)

Attribute ID Attribute Name
1 User-Name
4 NAS-IP-Address
5 NAS-Port
8 Framed-IP-Address
30 Called-Station-Id
32 NAS-Identifier
42 Acct-Input-Octets
Page 196
Refers to the user-name reported in Accounting for subscriber-aware or
subscriber-unaware Large Scale NAT users. The reported format for
subscriber-unaware users is LSN44@, DS-lite@ or NAT64@ followed by the
users inside ipv4 or ipv6 address. The reported format and length for
subscriber-aware users is configured and driven by configure router nat
inside subscriber-identification and send when user-name is included under
configure aaa isa-radius-policy <name>. This attribute has the same content
as [26-6527-11] Alc-Subsc-ID-Str for subscriber-unaware Large Scale NAT
users.
The identifying IP Address of the NAS requesting the Authentication or
Accounting and maps to the ipv4 address from the system interface
(configure router interface system address <ip-address>).
Unique 32 bit encoded number [31..0] that holds the MS-ISA MDA used for
LSN accounting. The following formatting is used [3 bits 31..29 value 000],
[4 bits 28..25 value slot-ms-isa], [4 bits 24..21 value mda-nbr-ms-isa], [6 bits
20..15 000010], [15 bits 14..0 0000 0000 0000 0000].
Refers to the inside private IP address of the user (LSN44) and send when
framed-ip-addr is included in configure aaa isa-radius-policy <name>.
Holds information to which nat-group and nat-member the NAT user belongs.
The format of this attribute is a string 00-00-00-00-<NatGroup>-
<NatMember>. The command show isa nat-group holds the link between
ms-isa mda, NatGroup and NatMember. Optionally sent when called-station-
id is included under configure aaa isa-radius-policy <name>.
A string (configure system name <system-name>) identifying the NAS
originating the Authentication or Accounting requests and sent when nas-
identifier is included for the corresponding application: configure subscriber-
mgmt authentication-policy (ESM authentication), configure subscriber-
mgmt radius-accounting-policy (ESM accounting), configure aaa isa-
radius-policy (LSN accounting, WLAN-GW) and configure aaa l2tp-
accounting-policy (L2TP accounting).
Indicates how many Layer 3 octets have been sent to this nat user over the
course of this service being provided and send together with [43] Acct-
Output-Octets, [52] Acct-Input-Gigawords and [53] Acct-Output-Gigawords
when octet-counters is included under configure aaa isa-radius-policy
<name>.
7750 SR RADIUS Attributes Reference Guide
Description