Position Of Coordinate Systems And Reference Points - Siemens SINUMERIK 828D Function Manual

K2: Axis Types, Coordinate Systems, Frames
10.3 Zeros and reference points
10.3.2

Position of coordinate systems and reference points

Control POWER ON
For incremental measuring probes, the reference point must be approached each time the control is activated so
that the control can transfer all position values to the coordinate system.
Figure 10-7 Position of coordinate systems by machine zero M and workpiece zero W
Figure 10-8 Position of reference point in relation to machine zero
708
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions