863] System Node Information - Samsung OfficeServ 7000 Series Programming Manual

[ 863] SYSTEM NODE INFORMATION

2 6 0 B
This MMC is the program that specifies the system information of SPNET(Samsung Proto-
col Networking). It is useful when many systems are consisted through SPNET and inter-
locked with LCR. There are maximum 2000 entries.
No
0 ACCESS NUM
1 IP ADDR
2 TEL NUMBER
3 MAX COUNT
SPNET is VoIP Network function developed by Samsung. (it is not standard func-
tion.)
C ONDITIONS
1 0 4 3 B
LINK ID should not be inputed at MMC 820 SYSTEM LINK and ACCESS NUMBER &
TEL NUMBER should be inputed at LCR table.
A CTION
1 0 4 4 B
1) Press Transfer button and enter 863.
Display shows:
2) Enter the node entry number.
OR
Press Volume button to select and press
Right Soft button to move cursor.
3) Enter the option number
OR
Press Volume button to select and press
Right Soft button to store.
4) Enter the access number.
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
Samsung Business Communications
Option
Other System's ID
Other System's IP address
Rerouting Trunk Number (excluding VoIP Trknk Number). If
SPNET function is not work, Call is rerouted through this trunk
If you dial a valid digit string until Max Count number, the system
set up call.
CHAPTER 2. MMC Programming
Description
DISPLAY
( 0 0 01) ACCESS NUM
U U
(0001) A C CESS NUM
U U
(0001) ACCESS NUM
(0001) ACCESS NUM
1
U U
2-419