400] Customer On/Off Per Trunk - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 400] CUSTOMER ON/OFF PER TRUNK

9 7 B
Assigns several options(listed below) on a per-trunk basis.
No Option
0 1A2 EMULATION
1 TRUNK INC DND
2 TRUNK FORWARD
3 LCR ALLOW
6 EFWD EXT CLI
7 REPEAT CLI
8 TONECHK DISC
9 AUTO ANSWER
10 COLORING AS
11 TANDEM CLI
2-104
Default
OFF When this option is set to ON up to 4 internal stations
can participate in a conversation on this trunk by
pressing the trunk key.
OFF When this option is set to ON a trunk that is
programmed to ring a specific station(a private line or
DIL) will ring at that station if the station is in DND.
ON When this option is set to OFF this trunk will not follow a
ringing stations call forwarding.
OFF Allows LCR to be switched ON/OFF when a trunk is
accessed using a DT key or by dialling its port number
(e.g., 701).
ON This option determines what kinds of CLI number will be
sent to the external forwarded outgoing call.(Station or
Received CLI from Trunk)
ON This option determines what kinds of CLI number will be
sent to the trunk to trunk call.(Trunk or Received CLI
from Trunk)
OFF When this option is set to ON, loop trunk can be discon-
nected by detecting busy tone.(To use this feature, the
LP TRK TONE DISC option in MMC 861 must be set to
ENABLE.)
OFF When this option is set to ON, Auto Answer mode can
be assigned on a per-trunk basis.
OFF To provide coloring, and not ring back tone, a channel
should be connected when a trunk line call is received.
For a trunk line call that no channel is connected, this
option determines if the coloring service is provided by
sending the ANSBACK message.
ON When this option is set to ON, "0" is attached in front of
the Caller ID received for a trunk line Tandem call.
Description
Samsung Business Communications