506] Tone Cadence - Samsung OfficeServ 7000 Series Programming Manual

[ 506] TONE CADENCE

1 3 5 B
Provides the ability to customize the tone cadence on a system-wide basis. The system
provides 11 types of tone and three types of tone provided from Central Office or a PBX
system can be detected.
When changing the MMC [506]
MMC [506] should not be changed from the default levels without the assistance
of the local SAMSUNG distributor.
No Item
00 BUSY TONE
01 CONFM/BARGE
02 DIAL TONE
03 DND/NO MORE
04 ERROR TONE
05 HOLD/CAMPON
06 MSGWAT TONE
07 RGBACK TONE
08 RING TONE
09 TRANSFER
TONE
10 DID RNGBACK
11 CO BUSY
12 CO RINGBACK
13 CO DIAL
D EFAULT DATA
6 3 2 B
TONE
BUSY TONE
CONFIRM/BARGE-IN
DIAL TONE
Samsung Business Communications
The called station is busy.
A feature has been successfully activated/cleared or a Barge-In with
Tone has been performed.
The system is ready to interpret key presses/dialled digits.
The called station is in DND or has no free CALL buttons.
An error has been made.
This is the system generated hold tone.
This is the tone heard at an SLT with a message waiting.
The called station is ringing.
This is the tone heard from a ROP device or Loud Bell when these
devices are called.
This is the tone heard when the transfer button is pressed or an SLT
hook flashes.
This is the tone heard by the outside party when they dial a DID number.
This is used to detect the busy tone provided from Central Office or a PBX
system.
This is used to detect the ring back tone provided from Central Office or
PBX system.
This is used to detect the dial tone provided from Central Office or PBX
system.
ON OFF
350
50
CHAPTER 2. MMC Programming
Description
ON
350 350
50 50
CONTINUOUS
(unit: milliseconds)
OFF
350
50
2-171