420] Pri Options - Samsung OfficeServ 7000 Series Programming Manual

[ 420] PRI OPTIONS

1 1 7 B
This MMC allows the technician to program a PRI trunk card.
No Option
0 CHANNEL ANY
1 PRI MODE
NORMAL
DID
2 DLSEND
ENBLOCK
OVERLAP
3 CLIP TABLE
4 NB TYPE
UNKNOWN
INT.NAT
NATIONAL
NETWORK
SUBSCRIB
ABBREV
EXTEN
5 NB PLAN
UNKNOWN
ISDN
DATA
TELEX
NATIONAL
PRIVATE
EXTEN
Samsung Business Communications
When this option is set to YES, the system will place calls on any free
channel of that PRI if the channel chosen by the user is busy. If set to
NO, they will receive a busy signal if they attempt to access a busy
channel even if the other channel on that PRI is free.
PRI access mode select.
Point to Point NORMAL. This operates like a standard telephone line
with one CO number per channel and ring according to MMC 406.
Point to Point Direct Inward Dial. This operates in a similar manner to an
analogue DID circuit with multiple CO numbers pointed to a single
channel and translated within the system(MMC714) to a single device.
PRI dial sending mode select.
Digits will be collected and sent in a single block similar to a cellphone.
Digits will be sent as they are dialled by the user.
Used to select the Calling Party Number to send to the network. If
NONE, MMC405 CO TRUNK NUMBER is sent to the network;
otherwise, the Calling Party Number entry in MMC 323 corresponding
with the selected number is sent to the network.
Used to select the type of the Calling Party Number to send to the
network.
Unknown number
International number
National number
Network specific number
Subscriber number
Abbreviated number
Local number
Used to select the type of the Calling Party Number Plan to send to the
network.
Unknown numbering plan
ISDN numbering plan(CCITT E.163-164)
Data numbering plan(CCITT X.121)
Telex numbering plan(CCITT F.69)
National standard numbering plan
Private numbering plan
Local numbering plan
CHAPTER 2. MMC Programming
Description
2-135