820] Assign System Link Id - Samsung OfficeServ 7000 Series Programming Manual

[ 820] ASSIGN SYSTEM LINK ID

2 2 2 B
This MMC is used to assign the system link ID for PRI and VoIP networking. Up to 100
link IDs can be entered including SELF ID. In addition, each Link ID is associated with the
IP address and IP address type of the MCP card for that system.
Option
LINK ID
SIGNAL G/W
TIME SYNC
IP TYPE
NODE NAME
C ONDITIONS
9 2 5 B
'SELF' represents self-node, and must be set to use the networking function. Items other
than 'SELF' are used for station numbers and can be omitted.
D EFAULT DATA
9 2 6 B
NONE
A CTION
9 2 7 B
1) Press Transfer button and enter 820.
Display shows:
2) Enter SELF link ID via dial keypad and
press Right Soft button.
3) Press Volume button to select other link ID
and press Right Soft button to mover cursor.
4) Enter other link ID via dial keypad and
press Right Soft button.
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
R ELATED ITEMS
9 2 8 B
MMC 821
MMC 823
Samsung Business Communications
System ID for networking feature.
System IP address for VoIP networking.
Time sync option for updating System Date and Time same with QSIG Call
Time
System IP address type for VoIP networking. SELF system IP address type
determines 'SYSTEM IP TYPE' in MMC 830.
System Node Name for VoIP networking
ASSIGN NETWORK TRUNK
ASSIGN NETWORK COS
CHAPTER 2. MMC Programming
Description
DISPLAY
S E LF :LINK ID
U U
SELF :LINK ID
11
S Y S01:LINK ID
U U
S Y S01:LINK ID
U U
22
2-321