747] Rate Calculation Table - Samsung OfficeServ 7000 Series Programming Manual

[ 747] RATE CALCULATION TABLE

1 9 0 B
The RATE CALCULATION TABLE is used to define the billing charges for each COST
RATE. These rate tables correlate with the Trunk Cost Rate and the Costing Dial Plan.
There are eight call costing rates. Each rate has the following data fields.
No
0 1ST DUR
(FIRST INTERVAL
DURATION)
1 1ST COST
(FIRST INTERVAL
COST)
2 2ND DUR
(SECOND
INTERVAL
DURATION)
3 2ND COST
(SECOND
INTERVAL COST )
4 SURCHARGE
Currency values
Currency values(£ or €) depend on the setting for the USE EURO option
in MMC 210.
D EFAULT DATA
8 1 7 B
ALL COST RATES: NO DATA
A CTION
8 1 8 B
1) Press Transfer button and enter 747.
Display shows:
2) Dial COST RATE number 1-8.(e.g., 3)
OR
Press Volume button to select COST RATE and
press Right Soft button to move cursor.
Samsung Business Communications
Type
This is the amount of time at the beginning of each call to which a
fixed cost is applied.
The range is 0-999 seconds; e,g. 180 seconds(three minutes).
This is the cost for the first interval duration in £s sterling or Euros.
The range is 0 to 999; e.g., 345(£3.45 or €3.45).
This is the duration of each billing increment after the first interval
has expired.
The range is 0-999 seconds; e.g., 006 seconds(six seconds).
This is the cost for each billing increment, in £s sterling or Euros,
after the first interval has expired.
The range is 0-999; e.g., 100(£1.00 or €1.00).
This is a one-time charge, in £s sterling or Euros, that is applied to
the call over and above the time charges.
The range is 0-999; e.g.,150(£1.50 or €1.50).
(£ or €)
CHAPTER 2. MMC Programming
Description
DISPLAY
COST RATE ( 1 )
U U
1ST DUR :000 SEC
COST RATE (3)
1 S T DUR :000 SEC
U U
2-273