217] Traffic Report Option - Samsung OfficeServ 7000 Series Programming Manual

[ 217] TRAFFIC REPORT OPTION

7 0 B
This MMC is used to print a traffic report and select options. The traffic report can be
printed on demand, or every hour, or at a programmed time each day, or for up to three
separately-timed shifts. Automatic printing will always clear the totals.
When report MANUAL PRINT OUT is selected, the options are:
No
0 PRINT AND CLEAR
1 PRINTOUT ONLY
2 CANCEL PRINTOUT
When AUTO PRINT OPTN is selected, the options are:
No
0 AUTO PRINT OFF
1 DAILY
2 EVERY HOUR
3 THREE TIME SHIFT
When a report is printed, the totals represent call statistics accumulated from the date of the
last report stated as BEGINNING: D & T up to the date of this printout stated as ENDING
D & T.
If there are no trunks in a group, the trunk group report for that group will not print.
C ONDITIONS
4 0 8 B
If this function is required in an OfficeServ 7000 Series system with an MCP card, you
must connect the LAN cable to the MCP card and be connected to a terminal supporting
the TCP/IP function.
D EFAULT DATA
4 0 9 B
AUTO PRINT OFF
Samsung Business Communications
Option
A report is printed and all totals are reset to 0.
A report is printed and all the totals are saved.
Cancels printout.
Option
Automatic print feature is disabled.
A report is printed at a programmable time every day and all the
totals are reset to '0'.
A report will be printed every hour.
Up to three separate Start and End times may be programmed to
report traffic within different shifts. A report is printed at the end of
each End time and all totals are reset to '0'.
CHAPTER 2. MMC Programming
Description
Description
2-63