849] Wlan Configuration - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 849] WLAN CONFIGURATION

2 4 9 B
This MMC is used to set the WLAN configuration.
Parameter
REGISTER VoWLAN
WIP REGIST CLEAR
WBS WEP SERVICE
WEP KEY
STATIC WBS IP
STATIC WIP IP
SELECT AP
D EFAULT DATA
1 0 1 1 B
REGISTER VoWLAN: DISABLE
WIP REGIST CLEAR: FORCED
WBS WEP SERVICE: DISABLE
WEP KEY: NONE
STATIC WBS IP: DISABLE
STATIC WIP IP: DISABLE
A CTION
1 0 1 2 B
1) Press Transfer button, and press 849.
2) Enter the PASSCODE.
(This PASSCODE is assigned in MMC 202
WLAN REGST)
3) Select ENABLE to register a terminal.
4) Select WIP REGIST CLEAR to clear the registration
status for a terminal.
5) Select the WEP KEY setting when ENCRYPTION
is selected.
2-392
Enable or disable registration of new WIP-5000M mobile phone.
Used to clear the registration of WIP. FORCED mode clearing is used
when the device is not connected normally(e.g., device broken), other-
wise the NORMAL mode clearing can be used.
Enable or disable the WEP(Wired Equivalent Privacy) feature.
Assign the WEP key.(13 characters only)
Select the use of Static WBS IP.
Select the use of Static WIP IP.
Select if using COMBO or BASIC APs.(If COMBO is selected, a WLI card
must be installed in the system. BASIC allows APs to run without this
card.) In case of OfficeServ 7100 system, select if using DUAL AP or BA-
SIC WBS. In case of OfficeServ 7030 system, it can be used only DU-
ALAP.
Description
DISPLAY
ENTER PASSWORD
_
ENTER PASSCODE
****
REGISTER VoWLAN
ENABLE
WIP REGIST CLEAR
3301:FORCED
WBS WEP SERVICE
DISABLE
Samsung Business Communications