803] Assign Tenant Group - Samsung OfficeServ 7000 Series Programming Manual

[ 803] ASSIGN TENANT GROUP

2 0 9 B
Allows the assignment of tenant groups on a per-cabinet, slot and port basis. The simple
rule is Cabinet-Slot-Port = Tenant. The simplicity of this program allows for flexible
assignments. The only information needed is the correct correlation of entries.
D EFAULT DATA
8 8 5 B
ALL ASSIGNMENTS: TENANT 1
MMC [803]
This MMC is not shown in OfficeServ 7100/ OfficeServ 7030.
A CTION
8 8 6 B
1) Press Transfer button and enter 803.
Display shows:
2) Enter cabinet number.(if no change press
Right Soft button to move cursor.)
3) Enter slot number.(if no change press Right
Soft button to move cursor.)
4) Enter port number.(if no change press
Right Soft button to move cursor.)
5) Enter tenant number.(if no change press
Right Soft button to return to step 2)
6) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
R ELATED ITEMS
8 8 7 B
NONE
Samsung Business Communications
CHAPTER 2. MMC Programming
DISPLAY
TENANT GROUP
C:1 S:1 -01 T:1
TENANT GROUP
C:1 S:1 –01 T:1
TENANT GROUP
C:1 S:2 -01 T:1
TENANT GROUP
C:1 S:2 -03 T:1
TENANT GROUP
C:1 S:2 -03 T:2
2-299