805] Tx Level And Gain - Samsung OfficeServ 7000 Series Programming Manual

[ 805] TX LEVEL AND GAIN

2 1 1 B
Allows the system administrator to set the base level of TX volume on phones. There are
eight levels that can be controlled by the Volume buttons on phones, and 10 controllable
levels in the system. This MMC allows the system administrator to classify any desired
eight levels within 11.
No Option
0 TX LEVEL CONTROL
1 MISC TSW GAIN
2 TSW GAIN
CONTROL
3 CID TYPE/LEVEL
When changing the MMC [805]
'MMC [805] TX LEVEL AND GAIN' should not be changed from the default levels
without the assistance of the local SAMSUNG distributor.
Samsung Business Communications
Adjusts the transmitting sensitivity(max.: 9) Default values are:
INDEX: 0 1 2 3
LEVEL: 0 1 2 4
Adjusts the level of the internal music source of the MCP card or
the external music source of the MIS card(0~7, higher numbers
mean lower levels). Default value is 0.
This option is not shown in the OfficeServ 7100
system because OfficeServ 7100
not support MIS card.
Adjusts the tone sensitivity. There are eight types of matrix
connections of the T-Switch that adjust the tone sensitivity(0-7,
below). Connection between Trunk lines are only applicable when
set as 0 in MMC 421.
0 DGP DLI phone
1 SLT SLI phone
2 ATRK Analogue trunk
3 DTRK Digital trunk
4 ITP ITP phone
5 VOIP MGI port or IP-based phone
6 SVMi SVMi port
7 WiFi WIP port
8 SOFT Soft Phone
9 UMS UMS port
10 SIP SIP port
Adjusts the CID type and TX/RX Gain
- TYPE: CID TYPE control. (BELLCORE/ETSI)
- TX LEVEL: TX gain control (0 – 20)
- RX LEVEL: RX gain control (-6 – 0)
- DOWNLOAD: download adjusted CID TYPE and TX/TX gain
to SP
CHAPTER 2. MMC Programming
Description
4 5 6 7
3 5 6 7
/ OfficeServ 7030
/ OfficeServ 7030 system does
2-303