Download Print this page

Samsung OfficeServ 7000 Series Programming Manual

Hide thumbs

Advertisement

Table of Contents
Ed.
00
OfficeServ 7000 Series Call Server
Programming Manual

Advertisement

Table of Contents
loading

  Related Manuals for Samsung OfficeServ 7000 Series

  Summary of Contents for Samsung OfficeServ 7000 Series

  • Page 1 OfficeServ 7000 Series Call Server Programming Manual...
  • Page 2 This guide is proprietary to SAMSUNG Electronics Co., Ltd. and is protected by copyright. No information contained herein may be copied, translated, transcribed or duplicated for any commercial pur- poses or disclosed to the third party in any form without the prior written consent of SAMSUNG Electronics Co., Ltd.
  • Page 3: Introduction

    Likewise, using a phone to change the system setup is called MMC (Man Machine Communication) program. This guide describes how to program a digital phone. A udience 1 1 B This guide is intended for users who program the MMC of the OfficeServ 7000 Series sys- tem. G uide Contents 1 2 B This guide is composed of two Chapters and Abbreviation.
  • Page 4: C Onventions

    The lined box with ‘Courier New’ font will be used to distinguish between the main content and console output screen text. ‘Bold Courier New’ font will indicate the value entered by the operator on the console screen. Samsung Business Communications...
  • Page 5: R Eference Guides

    INTRODUCTION R eference Guides 1 5 B The following guides are also provided with your OfficeServ 7000 Series system. O fficeServ 7000 Series Installation Guide 1 0 6 2 B Describes the installation procedures and specifications for the OfficeServ 7000 Series sys- tem.
  • Page 6: Safety Concerns

    S ymbols 1 7 B Caution Indication of a general caution Restriction Indication for prohibiting an action for a product Instruction Indication for commanding a specifically required action © SAMSUNG Electronics Co., Ltd.
  • Page 7: Warning

    SAMSUNG distributor. Compliance with the National Version Standards For the national version, OfficeServ 7000 Series is designed to comply with the standards of the corresponding country. Therefore, if you need to use MMC 812 (Set Country Code), please consult your dealer for advice.
  • Page 8: Table Of Contents

    N etworking Function ....................1-23 1 .6.3 V oIP Function ....................... 1-23 1 .6.4 W LAN Function ......................1-24 1 .6.5 L CR Function ....................... 1-24 1 .6.6 A uto Attendant/Voice Mail Function ................1-25 © SAMSUNG Electronics Co., Ltd.
  • Page 9 [ 202] CHANGE FEATURE PASSCODE ..................2-46 [ 203] ASSIGN UA DEVICE ....................... 2-48 [ 204] COMMON BELL CONTROL .................... 2-49 [ 205] ASSIGN LOUD BELL ....................... 2-50 [ 206] BARGE-IN TYPE ......................2-51 [ 207] ASSIGN VM/AA PORT ..................... 2-52 Samsung Business Communications...
  • Page 10 [ 403] TRUNK TOLL CLASS ....................2-108 [ 404] TRUNK NAME ........................ 2-110 [ 405] TRUNK CO TEL NUMBER ..................... 2-111 [ 406] TRUNK RING ASSIGNMENT ..................2-112 [ 407] FORCED TRUNK RELEASE ..................2-113 VIII © SAMSUNG Electronics Co., Ltd.
  • Page 11 [ 510] SLI RING CADENCE ..................... 2-176 [ 511] MSG WAITING LAMP CADENCE .................. 2-178 [ 512] HOLIDAY ASSIGNMENT ....................2-179 [ 513] HOTEL TIMER ....................... 2-180 [ 514] TONE SOURCE ......................2-181 [ 515] DAYLIGHT ASSIGNMENT ..................... 2-182 Samsung Business Communications...
  • Page 12 [ 720] COPY KEY PROGRAMMING ..................2-241 [ 721] SAVE STATION KEY PROGRAMMING ................. 2-242 [ 722] STATION KEY PROGRAMMING ................... 2-243 [ 723] SYSTEM KEY PROGRAMMING ................... 2-250 [ 724] DIAL NUMBERING PLAN ....................2-252 © SAMSUNG Electronics Co., Ltd.
  • Page 13 ..................... 2-314 [ 815] CUSTOMER DATABASE COPY ..................2-315 [ 816] CONFERENCE GAIN ....................2-317 [ 818] PROGRAM DOWNLOAD ....................2-318 [ 819] MEDIA CARD FILE CONTROL ..................2-319 [ 820] ASSIGN SYSTEM LINK ID .................... 2-321 Samsung Business Communications...
  • Page 14 ....................2-409 [ 859] HARDWARE VERSION DISPLAY ................. 2-414 [ 861] SYSTEM OPTIONS ....................... 2-416 [ 863] SYSTEM NODE INFORMATION ................... 2-419 [ 865] FAN POWER CONTROL ....................2-421 [ 889] DISPLAY SERVER STATUS ..................2-423 © SAMSUNG Electronics Co., Ltd.
  • Page 15 T able 1.14 LCR Function Programming list ................1-24 T able 1.15 Auto Attendant/Voice Mail Function Programming list ........... 1-25 T able 1.16 Diagnosis Function Programming list ..............1-26 T able 1.17 Hotel Function Programming list ................1-26 Samsung Business Communications XIII...
  • Page 17: C Hapter 1. O Verview Of Mmc Programming

    Program List by User’s Level For more information about the programming level, refer to ‘1.4 Program List by User’s Level’ of this chapter. Samsung Business Communications...
  • Page 18: Digital Phones

    6 programmable buttons: left column is numbered 1-3 from the top; right column is numbered 4-6 from the top. Buttons 1 to 3 are special buttons ‘A–C’ and buttons 4 to 6 are special buttons ‘D–F’ used for programming. Samsung Business Communications...
  • Page 19: Ds/Itp-5000 Series Phones

    DS-5007S. Examples are shown in the figures below. Programmable Buttons(21) Soft Buttons Scroll Button Speaker Telephone Status Indicator LCD Display A Button Volume Buttons Redial Button Conference Button Transfer Button Dial Buttons Speaker Button Programmable Buttons(17) Hold Button Microphone Figure 1.2 DS-5038S Phone Samsung Business Communications...
  • Page 20: Figure 1.3 Ds/Itp-5014D/5021D Phone

    A Button A Button Programmable Buttons Soft Buttons Scroll Button Telephone Speaker Status Indicator LCD Display Volume Button Redial Button Conference Button Transfer Button Navigation Button Speaker Button Dial Buttons Hold Button Microphone Figure 1.3 DS/ITP-5014D/5021D Phone Samsung Business Communications...
  • Page 21: Figure 1.4 Ds-5014S/5007S Phone

    Soft Buttons: Save data or move the cursor left and right. Speaker Button: Save data and proceed to the next program. Hold Button: Erase the previously entered item. A Button: Select uppercase or lowercase text. Transfer Button: Enter the programming mode. Samsung Business Communications...
  • Page 22: Cautions In Programming

    (default is 60 seconds), the phone returns to the idle state from programming mode. Programming mode halts if the handset is picked up or the Transfer button is pressed or the phone is unplugged. Any data previously entered in the display is saved. Samsung Business Communications...
  • Page 23: Program List By User's Level

    ALARM AND MESSAGE MMC: 117 EDIT TEXT MESSAGE MMC: 118 CONFERENCE GROUP MMC: 119 CALLER ID DISPLAY MMC: 120 LARGE LCD OPTIONS MMC: 121 PHONE LANGUAGE MMC: 122 NEWS DISPLAY SPEED MMC: 125 EXECUTIVE STATE MMC:199 SHOW LICENSE Samsung Business Communications...
  • Page 24: Operator Level Programming

    MMC: 211 DOOR RING ASSIGNMENT MMC: 214 DISA ALARM RINGING STATION MMC: 217 TRAFFIC REPORT OPTION MMC: 220 ISDN SERVICE TYPE MMC: 221 EXTENSION TYPE MMC: 222 FAX PAIR MMC: 224 WAKE-UP ANNOUNCEMENT MMC: 225 UMS/IVR Service Samsung Business Communications...
  • Page 25: Table 1.3 Station Related Mmc List

    MMC: 324 SLI2 GAIN MMC: 326 RING BACK TONE MESSAGE SET MMC: 327 MULTI MEDIA SERVICE 1 .4.2.3 Trunk Related MMC 2 6 7 B The MMC programs related to the function of the trunk are as follows: Samsung Business Communications...
  • Page 26: Table 1.4 Trunk Related Mmc List

    BRI S0 MAPPING MMC: 425 CID TRUNKS MMC: 426 TRUNK GAIN CONTROL MMC: 428 ASSIGN TRUNK/TRUNK USE MMC: 432 SET H-TRK MMC: 433 COST RATE MMC: 434 CONNECTION STATUS MMC: 436 TRUNK TMC GAIN MMC: 437 16TRUNK GAIN 1-10 Samsung Business Communications...
  • Page 27: Table 1.5 Timer And Tone Related Mmc List

    ASSIGN STATION TO PAGE ZONE MMC: 605 ASSIGN EXTERNAL PAGE ZONE MMC: 606 ASSIGN SPEED BLOCK MMC: 607 UCD OPTIONS MMC: 608 ASSIGN REVIEW BLOCK MMC: 609 CALL LOG BLOCK MMC: 611 ALLOW TEXT MESSAGING MMC: 612 ALLOW GROUP CONFERENCE Samsung Business Communications 1-11...
  • Page 28: T Able 1.7 Tables, Codes, Aa, Dect And Vm Mmc List

    MY AREA CODE MMC: 719 IDLE DISPLAY MMC: 720 COPY KEY PROGRAMMING MMC: 721 SAVE STATION KEY PROGRAMMING MMC: 722 STATION KEY PROGRAMMING MMC: 723 SYSTEM KEY PROGRAMMING MMC: 724 DIAL NUMBERING PLAN MMC: 725 SMDR OPTIONS 1-12 Samsung Business Communications...
  • Page 29 ASSIGN VMMOH MMC: 757 VM IN/OUT MMC: 758 VM DAY/NIGHT MMC: 759 CLI RINGING MMC: 760 ITEM COST TABLE MMC: 761 TAX RATE SETUP MMC: 762 ROOM COST RATE MMC: 763 SECOND LCR MMC: 764 DISA PASSWORD Samsung Business Communications 1-13...
  • Page 30: Table 1.8 Technician Level Programming List

    MMC: 829 LAN PRINTER PARAMETERS MMC: 830 ETHERNET PARAMETERS MMC: 831 MGI PARAMETERS MMC: 832 VoIP ACCESS CODE MMC: 833 VoIP IP TABLE MMC: 834 H.323 OPTIONS MMC: 835 MGI DSP OPTIONS MMC: 836 H.323 GK OPTIONS 1-14 Samsung Business Communications...
  • Page 31 TECH PROGRAMMING LOGS MMC: 857 VIRTUAL CABINET MMC: 859 HARDWARE VERSION DISPLAY MMC: 860 UCD STATUS SERVICE MMC: 861 SYSTEM OPTIONS MMC:863 NODE INFO MMC: 865 FAN POWER CONTROL MMC: 889 DISPLAY SERVER STATUS MMC: 890 INITIALIZE PORT Samsung Business Communications 1-15...
  • Page 32: Programming List By Name

    ASSIGN RING TYPE MMC: 208 ASSIGN SPEED BLOCK MMC: 606 ASSIGN STATION COS MMC: 301 ASSIGN STATION GROUP MMC: 601 ASSIGN STATION MOH SOURCE MMC: 309 ASSIGN STATION TO PAGE ZONE MMC: 604 ASSIGN STATION/STATION USE MMC: 317 1-16 Samsung Business Communications...
  • Page 33 CHANGE FEATURE PASSCODE MMC: 202 CHANGE TECHNICIAN PASSCODE MMC: 801 CHANGE USER PASSCODE MMC: 101 CID TRANSLATION TABLE MMC: 728 CLI RINGING MMC: 759 COMMON BELL CONTROL MMC: 204 CONFERENCE GAIN MMC: 816 CONFERENCE GROUP MMC: 118 Samsung Business Communications 1-17...
  • Page 34 MMC: 830 EXECUTIVE STATE MMC: 125 EXTENSION TYPE MMC: 221 FAN POWER CONTROL MMC: 865 FAX PAIR MMC: 222 FORCED TRUNK RELEASE MMC: 407 H.323 GK OPTIONS MMC: 836 H.323 OPTIONS MMC: 834 HALT PROCESSING MMC: 810 1-18 Samsung Business Communications...
  • Page 35 MSG WAITING LAMP CADENCE MMC: 511 MSN DIGIT MMC: 421 MULTI MEDIA SERVICE MMC 327 MY AREA CODE MMC: 718 NETWORK DIAL TRANSLATION MMC: 824 NEWS DISPLAY SPEED MMC: 122 NODE INFO MMC 863 OPEN CUSTOMER PROGRAMMING MMC: 200 Samsung Business Communications 1-19...
  • Page 36 MMC 839 SLI RING CADENCE MMC: 510 SMDR OPTIONS MMC: 725 STATION GROUP NAME MMC: 602 STATION KEY PROGRAMMING MMC: 722 STATION LOCK MMC: 100 STATION NAME MMC: 104 STATION ON/OFF MMC: 110 STATION PAIR MMC: 740 1-20 Samsung Business Communications...
  • Page 37 MMC: 406 TRUNK STATUS READ MMC: 409 TRUNK TMC GAIN MMC: 436 TRUNK TOLL CLASS MMC: 403 TRUNK-WIDE TIMERS MMC: 503 TX LEVEL AND GAIN MMC: 805 UCD AGENT ID MMC: 717 UCD OPTIONS MMC: 607 Samsung Business Communications 1-21...
  • Page 38: Program List By Function

    The MMC programs related to the function of a phone that is connected with the Office- Serv 7000 Series are as follows: Table 1.10 Phone Function Programming list MMC Program No. Program Description MMC: 100 STATION LOCK MMC: 101 CHANGE USER PASSCODE MMC: 102 CALL FORWARD MMC: 103 SET ANSWER MODE 1-22 Samsung Business Communications...
  • Page 39: Networking Function

    IP PHONE INFORMATIONES MMC: 841 SYSTEM IP OPTIONS MMC: 844 IP STATION TYPE 1 .6.3 VoIP Function 2 6 B The MMC programs related to the function of VoIP (Voice over Internet Protocol) are as follows: Samsung Business Communications 1-23...
  • Page 40: Wlan Function

    Table 1.14 LCR Function Programming list MMC Program No. Program Description MMC: 710 LCR DIGIT TABLE MMC: 711 LCR TIME TABLE MMC: 712 LCR ROUTE TABLE MMC: 713 LCR MODIFY DIGIT TABLE MMC: 763 SECOND LCR 1-24 Samsung Business Communications...
  • Page 41: Auto Attendant/Voice Mail Function

    VM CARD RESTART MMC: 751 ASSIGN MAILBOX MMC: 752 AUTO RECORD MMC: 753 WARNING DESTINATION MMC: 754 VM HALT MMC: 755 VM ALARM MMC: 756 ASSIGN VM MOH MMC: 757 VM IN/OUT MMC: 758 VM DAY/NIGHT Samsung Business Communications 1-25...
  • Page 42: Diagnosis Function

    Serv 7100 / OfficeServ 7030). MMC: 749 RATE CALCULATION TABLE (This MMC is not shown in OfficeServ 7100 / OfficeServ 7030). MMC: 760 ITEM COST TABLE MMC: 761 TAX RATE SETUP MMC: 762 ROOM COST RATE 1-26 Samsung Business Communications...
  • Page 43: Chapter 2. Mmc Programming

    Enter the program number. Or, select the program number with the Volume button and press the Speaker button. Or, Press Transfer button in a pause state and enter the program number. 4) Start programming the corresponding program. Samsung Business Communications...
  • Page 44: Programming Procedure

    If so, the station cannot be locked, but a locked station can be unlocked. A station can be locked or unlocked under any condition when the station is in Opera- tor Level Programming or Technician Level Programming. D EFAULT DATA 2 7 3 B ALL STATIONS UNLOCKED Samsung Business Communications...
  • Page 45 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 2 7 5 B MMC 101 CHANGE USER PASSCODE MMC 301 ASSIGN STATION COS MMC 701 ASSIGN COS CONTENTS Samsung Business Communications...
  • Page 46: 101] Change User Passcode

    3) Press Hold button to reset passcode. [205] PASSCODE PASSCODE:1234 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 2 7 9 B MMC 100 STATION LOCK Samsung Business Communications...
  • Page 47: 102] Call Forward

    Both ‘FORWARD’ and ‘EXT FWD’ must be set to ‘ON’ in MMC 701, ASSIGN COS CONTENTS in order to forward a call to an external number. If only ‘FORWARD’ is set to ‘ON’, calls can only be forwarded to internal numbers.(Default: ‘OFF’) D EFAULT DATA 2 8 1 B NONE Samsung Business Communications...
  • Page 48 MMC. R ELATED ITEMS 2 8 3 B MMC 301 ASSIGN STATION COS MMC 501 SYSTEM TIMERS MMC 502 STATION-WIDE TIMERS MMC 701 ASSIGN COS CONTENTS MMC 722 STATION KEY PROGRAMMING MMC 723 SYSTEM KEY PROGRAMMING Samsung Business Communications...
  • Page 49: 103] Set Answer Mode

    To answer the C.O. call automatically To answer the C.O. call automatically, set ‘ON’ the option ‘AUTO ANS CO’ in MMC 110. D EFAULT DATA 2 8 4 B ALL PHONES: RING Samsung Business Communications...
  • Page 50 Right Soft button to return to step 2 above. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 2 8 6 B MMC 111 PHONE RING TONE Samsung Business Communications...
  • Page 51: 104] Station Name

    #, space, &, !, :, ?, ., ,, %, $, -, <, >, /, =, [, ], @, ^, (, ), _, +, {, }, |, ; , ”, , ’. \. D EFAULT DATA 2 8 8 B NONE Samsung Business Communications...
  • Page 52 Right Soft button SAM SMITH to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 2 9 0 B NONE 2-10 Samsung Business Communications...
  • Page 53: 105] Station Speed Dial

    SPDBLK NOT EXIST may be selected. 3) Dial location number.(e.g., 05) [205] SPEED DIAL 05:_ Press Volume button to select location and press Right Soft button to move cursor. Samsung Business Communications 2-11...
  • Page 54 Dial Name) to enter a name for speed dial. Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 2 9 5 B MMC 106 STATION SPEED DIAL NAME MMC 606 ASSIGN SPEED BLOCK 2-12 Samsung Business Communications...
  • Page 55: 106] Station Speed Dial Name

    2. 5) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 2 9 9 B MMC 105 STATION SPEED DIAL MMC 606 ASSIGN SPEED BLOCK Samsung Business Communications 2-13...
  • Page 56: 107] Key Extender

    Station group number UCD Supervisor UCD group number Speed Dial Personal: 00-49 , System: 500-999 TCLIP Temporary CLIP table number SVM-800 Group Message Station group number VM Memo Extension or station group number Voice Transfer VM group number 2-14 Samsung Business Communications...
  • Page 57 R ELATED ITEMS 3 0 2 B MMC 720 COPY KEY PROGRAMMING MMC 721 SAVE STATION KEY PROGRAMMING MMC 722 STATION KEY PROGRAMMING MMC 723 SYSTEM KEY PROGRAMMING MMC 724 DIAL NUMBERING PLAN Samsung Business Communications 2-15...
  • Page 58: 108] Station Status

    Right Soft button to move cursor. 3) Dial 0~9 to select station status type. [205] STN STATUS PICKUP GROUP:01 Press Volume button to select status and press Right Soft button to return to step 2. 2-16 Samsung Business Communications...
  • Page 59 Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 0 5 B MMC 301 ASSIGN STATION COS MMC 302 PICKUP GROUPS MMC 303 ASSIGN BOSS/SECRETARY MMC 601 ASSIGN STATION GROUP MMC 604 ASSIGN STATION TO PAGE ZONE Samsung Business Communications 2-17...
  • Page 60: 109] Date Display

    COUNTRY: R IENTAL Press Volume button to scroll through modes and press Right Soft button to move cursor. 4) Press Volume button to scroll through formats and press Right Soft button to return to step 2. 2-18 Samsung Business Communications...
  • Page 61 CHAPTER 2. MMC Programming 5) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 0 9 B MMC 505 ASSIGN DATE AND TIME Samsung Business Communications 2-19...
  • Page 62: 110] Station On/Off

    SECURE OHVA When ON, OHVA announcements will be heard on the handset. When OFF, OHVA announcements will be heard over the phone speaker. 2-20 Samsung Business Communications...
  • Page 63 If there is no incoming/outgoing number to be displayed, only trunk number will be shown. D EFAULT DATA 3 1 0 B SEE DESCRIPTION SOME OPTIONS DEPEND ON COUNTRY Samsung Business Communications 2-21...
  • Page 64 Press Left or Right Soft button to return to step 2. 5) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 1 2 B MMC 301 ASSIGN STATION COS MMC 701 ASSIGN COS CONTENTS 2-22 Samsung Business Communications...
  • Page 65: 111] Phone Ring Tone

    Right Soft button to move cursor. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 1 5 B MMC 114 PHONE VOLUME MMC 318 DISTINCTIVE RINGING Samsung Business Communications 2-23...
  • Page 66: 112] Alarm Reminder Clock

    Press Volume button to select alarm type and press Right Soft button to move cursor and return to step 2. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. 2-24 Samsung Business Communications...
  • Page 67 CHAPTER 2. MMC Programming R ELATED ITEMS 3 1 8 B MMC 116 ALARM AND MESSAGE Samsung Business Communications 2-25...
  • Page 68: 113] View Memo Number

    4) Enter memo via dial keypad. [205] VIEW MEMO 1:CALL TO 5) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 2 2 B NONE 2-26 Samsung Business Communications...
  • Page 69: 114] Phone Volume

    1 is the lowest and level 16 the highest. D EFAULT DATA 3 2 3 B RING VOLUME: 4 OFF-HOOK RING VOLUME: 4 HANDSET VOLUME: 4 SPEAKER VOLUME: 13 BGM VOLUME: 13 PAGE VOLUME: 13 Samsung Business Communications 2-27...
  • Page 70 SPEAKER VOL :08 5) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 2 5 B MMC 111 PHONE RING TONE 2-28 Samsung Business Communications...
  • Page 71: 115] Set Programmed Message

    4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 2 9 B MMC 715 PROGRAMMED STATION MESSAGE MMC 722 STATION KEY PROGRAMMING MMC 723 SYSTEM KEY PROGRAMMING Samsung Business Communications 2-29...
  • Page 72: 116] Alarm And Message

    Press Volume button to select alarm and press Right Soft button to move cursor. 4) Enter alarm time in 24-hour clock format. [205] ALM REM(2) (e.g., 1300 for 1pm) HHMM: 3 00 NOTSET Display will automatically advance to step 5. 2-30 Samsung Business Communications...
  • Page 73 [205] ALM REM return to step 2. Meeting 7) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 3 3 B MMC 112 ALARM REMINDER CLOCK Samsung Business Communications 2-31...
  • Page 74: 117] Edit Text Message

    [205] TXTMSG( step 3. SAME TIME 5) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 3 8 B MMC 611 ALLOW TEXT MESSAGING 2-32 Samsung Business Communications...
  • Page 75: 118] Conference Group

    4) Dial 0 to select name or dial 1~4 to select member. [205] GRP(1)MBR1 O NE Press Volume button to select name or member and press Right Soft button to move cursor. Press Left Soft button to return to step 3. Samsung Business Communications 2-33...
  • Page 76 Right Soft button to return to step 4. 9-2794296 6) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 4 3 B MMC 612 ALLOW GROUP CONFERENCE 2-34 Samsung Business Communications...
  • Page 77: 119] Caller Id Display

    4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 4 6 B MMC 312 ALLOW CALLER ID MMC 608 ASSIGN REVIEW BLOCK MMC 728 CID TRANSLATION TABLE Samsung Business Communications 2-35...
  • Page 78: 120] Large Lcd Options

    Determines whether to display an image or not while ringing after a call is connected to a VIDEO IP phone (DISABLE/ENABLE). This option only supports VIDEO IP phones. D EFAULT DATA 3 4 7 B IDLE DISPLAY: CALENDAR DS KEY DISPLAY: TEL NUMBER DIAL MODE: ENBLOCK 2-36 Samsung Business Communications...
  • Page 79 0 3] DS KEY DSP Right Soft button. EXT NAME 5) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 4 9 B MMC 719 IDLE DISPLAY Samsung Business Communications 2-37...
  • Page 80: 121] Phone Language

    Press Volume button to make selection and press Right Soft button. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 5 2 B NONE 2-38 Samsung Business Communications...
  • Page 81: 122] News Display Speed

    Select all stations. 3) Dial speed option.(03~10) [205] CALL SPEED 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 5 5 B NONE Samsung Business Communications 2-39...
  • Page 82: 125] Executive State

    [205] X EC STATE IN A MEETING Press Volume button to make selection and press Right Soft button. 5) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. 2-40 Samsung Business Communications...
  • Page 83 CHAPTER 2. MMC Programming R ELATED ITEMS 3 5 9 B NONE Samsung Business Communications 2-41...
  • Page 84: 199] Show License

    SSIP MAX Maximum Number of Samsung standard SIP Station can be available. Samsung standard SIP Station means standard SIP Station produced by Samsung. If License Key is not inputed or invalid, Display show ‘INVAILD’ SSIP USE Number of resisted Samsung standard SIP Station...
  • Page 85 SHW LICENSE STS Display show admission status: E WS ALLOW : YES 3) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 6 2 B NONE Samsung Business Communications 2-43...
  • Page 86: 200] Open Customer Programming

    Enter MMC number and press Right Soft button to enter MMC. 5) Press Transfer button to exit. R ELATED ITEMS 3 6 5 B MMC 201 CHANGE CUSTOMER PASSCODE MMC 501 SYSTEM-WIDE TIMERS MMC 802 CUSTOMER ACCESS MMC NUMBER 2-44 Samsung Business Communications...
  • Page 87: 201] Change Customer Passcode

    Passcode failure.(return to step 2) CUST. PASSCODE VERIFY :FAILURE 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 6 9 B MMC 200 OPEN CUSTOMER PROGRAMMING Samsung Business Communications 2-45...
  • Page 88: 202] Change Feature Passcode

    Right Soft button to move cursor to passcode entry. AA RECORD :4321 3) Enter new passcode via digits from dial keypad. CHANGE PASSCODE AA RECORD :9999 Press Right Soft button to return to step 2. Continue to change other passcodes. 2-46 Samsung Business Communications...
  • Page 89 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 7 3 B MMC 410 ASSIGN DISA TRUNK MMC 507 ASSIGN RING PLAN TIME Samsung Business Communications 2-47...
  • Page 90: 203] Assign Ua Device

    3) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 7 6 B MMC 204 COMMON BELL CONTROL MMC 601 ASSIGN STATION GROUP MMC 605 ASSIGN EXTERNAL PAGE ZONE 2-48 Samsung Business Communications...
  • Page 91: 204] Common Bell Control

    Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 8 0 B MMC 203 ASSIGN UA DEVICE MMC 601 ASSIGN STATION GROUP Samsung Business Communications 2-49...
  • Page 92: 205] Assign Loud Bell

    Press Volume button to make selection and press Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 8 4 B NONE 2-50 Samsung Business Communications...
  • Page 93: 206] Barge-In Type

    Right Soft button. 3) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 3 8 7 B MMC 301 ASSIGN STATION COS MMC 701 ASSIGN COS CONTENTS Samsung Business Communications 2-51...
  • Page 94: 207] Assign Vm/Aa Port

    Press Volume button to select type and press Right Soft button. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 9 0 B MMC 726 VM/AA OPTIONS 2-52 Samsung Business Communications...
  • Page 95: 208] Assign Ring Type

    Left or Right Soft button to return to step 2 above. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 9 3 B NONE Samsung Business Communications 2-53...
  • Page 96: 209] Assign Add-On Module

    Use Volume button for selection of stations and press Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 3 9 7 B NONE 2-54 Samsung Business Communications...
  • Page 97: 210] Customer On/Off Per Tenant

    When ON, a call recalling to a station can be picked up using Direct Call Pickup, Pickup Group and My Group features. This applies to held calls recalling and transferred calls re- calling to a station. Samsung Business Communications 2-55...
  • Page 98 When ON, and an outside call is made via speed dial or LNR where more than 11 digits are dialled, then only the first 11 dialled digits are shown on the phone display. ONE TCH When OFF, phone users cannot use one-touch account FACC code(ACC) key. 2-56 Samsung Business Communications...
  • Page 99 When ON, and a trunk call transferred to the tie line is not an- swered within the transfer recall time, the call is recalled to the original transferring station. (This MMC is not shown in Office- Serv 7100 / OfficeServ 7300 Samsung Business Communications 2-57...
  • Page 100 3.1K W/O HLC When ON, an incoming call is dialed when the type of ISDN incoming call is 3.1K AUDIO type without HLC. AOC CALLCOST Hotel ENABLE option 2-58 Samsung Business Communications...
  • Page 101 CHAPTER 2. MMC Programming ISDN Line CHKIN RESTRC hotel check-in phone deposit phone restrict CHECK-IN FAC hotel check-in room FAC mode Samsung Business Communications 2-59...
  • Page 102 Right Soft button. 4) Repeat steps 2-3 for other options. Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 4 0 0 B NONE 2-60 Samsung Business Communications...
  • Page 103: 211] Door Ring Assignment

    Press Left Soft button to return to step 3. Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 4 0 3 B MMC 601 ASSIGN STATION GROUP Samsung Business Communications 2-61...
  • Page 104: 214] Disa Alarm Ringing Station

    Press Volume button to make selection. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 4 0 7 B MMC 202 CHANGE FEATURE PASSCODE MMC 601 ASSIGN STATION GROUP 2-62 Samsung Business Communications...
  • Page 105: 217] Traffic Report Option

    C ONDITIONS 4 0 8 B If this function is required in an OfficeServ 7000 Series system with an MCP card, you must connect the LAN cable to the MCP card and be connected to a terminal supporting the TCP/IP function.
  • Page 106 4) Enter daily report time.(HHMM) TRAFFIC REPORT A ILY HHMM:2200 5) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 4 1 1 B MMC 829 LAN PRINTER PARAMETERS 2-64 Samsung Business Communications...
  • Page 107: 220] Isdn Service Type

    AUDIO 3.1 Press Volume button to select option and press Right Soft button. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 4 1 4 B NONE Samsung Business Communications 2-65...
  • Page 108: 221] Extension Type

    1) Press Transfer button and enter 221. 0 1] PHONE USE Display shows: NORMAL STATION 2) Dial station number.(e.g., 214) 1 4] PHONE USE NORMAL STATION Press Volume button to select station and press Right Soft button to move cursor. 2-66 Samsung Business Communications...
  • Page 109 Press Volume button to select option and press Right Soft button. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 4 1 8 B MMC 813 HOTEL OPERATION Samsung Business Communications 2-67...
  • Page 110: 222] Fax Pair

    Press Volume button to select and press Right Soft button. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 4 2 2 B MMC 221 EXTENSION TYPE MMC 813 HOTEL OPERATION 2-68 Samsung Business Communications...
  • Page 111: 224] Audio Prompt

    [Right] Soft button. 4) Enter the AA/VMS prompt number specification AUDIO PROMPT R OMPT NO.:NONE ([1]).Or, select the AA/VMS prompt number specifi- cation by using the [Volume] button and move the cursor by pressing the [Right] Soft button. Samsung Business Communications 2-69...
  • Page 112 If you specify [NONE], press the [Hold] button. 8) Press the [Transfer] button to store the data and com- plete the procedure or press the [Speaker] button to store the data. RELATED ITEMS Program 601 Assign an extension group. 2-70 Samsung Business Communications...
  • Page 113: 225] Ip-Ums/Ivr Service

    4) Press the [Transfer] button to store the data and com- plete the procedure or press the [Speaker] button to store the data. RELATED ITEMS Program 830 Specify an Ethernet parameter. Program 841 System IP interworking information. Program 857 Specify a virtual cabinet card. Samsung Business Communications 2-71...
  • Page 114: 300] Customer On/Off Per Station

    When a MIS card is installed and this option is set to ON, the system will provide the CID signal to SLTs. NO RCL FLASH When the hook switch is flashed or the flash key is pressed, a recall signal will not be sent to the system. 2-72 Samsung Business Communications...
  • Page 115 Press Right Soft button to return to step 1. Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 4 2 9 B L CR PROGRAMMING: 1 0 6 5 B Samsung Business Communications 2-73...
  • Page 116 CHAPTER 2. MMC Programming MMC 710 LCR DIGIT TABLE MMC 711 LCR TIME TABLE MMC 712 LCR ROUTE TABLE 2-74 Samsung Business Communications...
  • Page 117: 301] Assign Station Cos

    Use Volume button to scroll through classes of service and press Right Soft button to advance to the next ring plan. Use Volume button to scroll through classes of service and press Left Soft button to return to step 2. Samsung Business Communications 2-75...
  • Page 118 Left Soft button to return to previous step. 6) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 4 3 2 B MMC 701 ASSIGN COS CONTENTS 2-76 Samsung Business Communications...
  • Page 119: 302] Pickup Groups

    Press Transfer button to save and exit. Press Speaker button to advance to next MMC. A CTION (PINGRING SERVICE ENABLED) DISPLAY 4 3 4 B 1) Press Transfer button and enter 302. PICKUP GROUP ( Display shows: MEMBER 01:201 Samsung Business Communications 2-77...
  • Page 120 Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 4 3 5 B MMC 107 KEY EXTENDER MMC 722 STATION KEY PROGRAMMING MMC 723 SYSTEM KEY PROGRAMMING 2-78 Samsung Business Communications...
  • Page 121: 303] Assign Boss/Secretary

    5) Press Left Soft button to return to step 2 and continue entries. Press Transfer button and enter to exit. Press Speaker button to advance next MMC. R ELATED ITEMS 4 4 0 B MMC 722 STATION KEY PROGRAMMING Samsung Business Communications 2-79...
  • Page 122: 304] Assign Extension/Trunk Use

    3) Dial the station use group number.(e.g., 304) (005) USE (304) DIAL: E S ANS:YES Press Volume button to select trunk use group and press Right Soft button. (005) USE (ALL) Select all trunk use groups. DIAL: E S ANS:YES 2-80 Samsung Business Communications...
  • Page 123 Soft button to return to step 2. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 4 4 4 B MMC 316 COPY STATION USABLE MMC 614 STATION/TRUNK USE GROUP Samsung Business Communications 2-81...
  • Page 124: 305] Assign Forced Code

    Right Soft button to return to step 2. 4) Press Transfer button and enter to exit. Press Speaker button to advance next MMC. R ELATED ITEMS 4 4 7 B MMC 707 AUTHORIZATION CODE MMC 708 ACCOUNT CODE 2-82 Samsung Business Communications...
  • Page 125: 306] Hot Line/Off Hook Selection

    CO call.(see above list of options if needed) 4) Press Transfer button and enter to exit. Press Speaker button to advance next MMC. R ELATED ITEMS 4 5 2 B MMC 502 STATION-WIDE TIMERS(OFF-HOOK SELECTION TIMER) Samsung Business Communications 2-83...
  • Page 126: 308] Assign Background Music Source

    Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 4 5 6 B MMC 309 ASSIGN STATION MOH SOURCE MMC 408 ASSIGN TRUNK MOH SOURCE 2-84 Samsung Business Communications...
  • Page 127: 309] Assign Station Moh Source

    Right Soft button to return to step 2. 4) Press Transfer button and enter to exit. Press Speaker button to advance next MMC. R ELATED ITEMS 4 6 0 B MMC 308 ASSIGN BACKGROUND MUSIC SOURCE MMC 408 ASSIGN TRUNK MOH SOURCE Samsung Business Communications 2-85...
  • Page 128: 310] Lcr Class Of Service

    R ELATED ITEMS 4 6 3 B L CR PROGRAMMING: 1 0 6 6 B MMC 710 LCR DIGIT TABLE MMC 711 LCR TIME TABLE MMC 712 LCR ROUTE TABLE MMC 713 LCR MODIFY DIGIT TABLE 2-86 Samsung Business Communications...
  • Page 129: 312] Allow Caller Id

    Right Soft button to return to step 2. 5) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 4 6 6 B MMC 119 CALLER ID DISPLAY Samsung Business Communications 2-87...
  • Page 130: 314] Confirm Outgoing Call

    Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 4 6 9 B MMC 501 SYSTEM-WIDE TIMERS 2-88 Samsung Business Communications...
  • Page 131: 315] Customer Set Relocation

    Press Speaker button to advance to next MMC. R ELATED ITEMS 4 7 3 B NONE Relocate EURO EURO EURO iDCS iDCS Allowed Table EURO 6B EURO 12B EURO 24B 48B AOM 64B AOM iDCS 28D Samsung Business Communications 2-89...
  • Page 132 IP Phone* Relocate iDCS Allowed 5012L 5014D 5021D 5007S 5014S 5038S Phone* Table EURO 6B EURO 12B EURO 24B 48B AOM 64B AOM iDCS 28D iDCS 18D iDCS 8D DS-5012L DS-5014D DS-5021D DS-5007S DS-5014S DS-5038S IP Phone* 2-90 Samsung Business Communications...
  • Page 133: 316] Copy Station Usable

    4) Press Right Soft button to return to step 2. Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 4 7 6 B MMC 304 ASSIGN EXTENSION/TRUNK USE MMC 614 STATION/TRUNK USE GROUP Samsung Business Communications 2-91...
  • Page 134: 317] Assign Station/Station Use

    Press Volume button to select YES/NO and press Right Soft button to move cursor. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 4 7 9 B MMC 614 STATION/TRUNK USE GROUP 2-92 Samsung Business Communications...
  • Page 135: 318] Distinctive Ringing

    At this time, the ring cadence is specified in Program 510. Ring Cadence (C : CADENCE) Ring Type STN RING (Extension Ring) TRK RING (Trunk Ring) ALM RING (Alarm Ring) DOOR RING (Door ring) CBK RING (Call Back Ring) Samsung Business Communications 2-93...
  • Page 136 [Right] Soft button. 6) Press the [Transfer] button to store the data and com- plete the procedure or press the [Speaker] button to store the data. R ELATED ITEMS 4 8 3 B Program 111 Specify Ring Tone 2-94 Samsung Business Communications...
  • Page 137: 319] Branch Group

    Press Volume button to make selection and press Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 4 8 6 B NONE Samsung Business Communications 2-95...
  • Page 138: 320] Preset Forward No Answer

    Right Soft button to move cursor. L L] PRESET FNA Select all stations. NONE OPT:BOTH 3) Dial valid number via keypad. [205] PRESET FNA OPT:BOTH Press Volume button to select call type and press Right Soft button to move cursor. 2-96 Samsung Business Communications...
  • Page 139 Right Soft button to return to step 2. 5) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 4 8 9 B MMC 102 CALL FORWARD Samsung Business Communications 2-97...
  • Page 140: 323] Calling Party Number

    Calling Party Numbers. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 4 9 2 B MMC 419 BRI OPTIONS MMC 420 PRI OPTIONS MMC 834 H.323 OPTIONS 2-98 Samsung Business Communications...
  • Page 141: 324] Sli2 Gain

    Or, press the [Volume] button to select a Download item and press the [Right] Soft button to move the cursor. 6) Enter Download Check ([0]:NO,[1]:YES). [201] GAIN DOWNLOAD Or, press the [volume] button to select the Download Check and press the [Right] Soft button. Samsung Business Communications 2-99...
  • Page 142 CHAPTER 2. MMC Programming R ELATED ITEMS 4 9 4 B None 2-100 Samsung Business Communications...
  • Page 143 4) Press the [Transfer] button to complete the procedure or press the [Speaker] button to store the data. R ELATED ITEMS 4 9 6 B Program 224 Specify Voice Alarm Message Program 318 Specify Identification Ring Samsung Business Communications 2-101...
  • Page 144: 327] Multi Media Service

    4) Select Yes/No of the service item by entering [0] or [3201] MMS SVC MMS RBACK :YES [1] and press the [Right] Soft button to save the data. 4) Press the [Transfer] button to complete the procedure or press the [Speaker] button to store the data. 2-102 Samsung Business Communications...
  • Page 145 CHAPTER 2. MMC Programming R ELATED ITEMS 4 9 8 B Program 224 Specify a Voice Alarm Message Program 830 Specify an Ethernet parameter. Samsung Business Communications 2-103...
  • Page 146: 400] Customer On/Off Per Trunk

    ANSBACK message. TANDEM CLI When this option is set to ON, “0" is attached in front of the Caller ID received for a trunk line Tandem call. 2-104 Samsung Business Communications...
  • Page 147 Press Volume button to select ON/OFF and press Right Soft button to return to step 2. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 5 0 0 B NONE Samsung Business Communications 2-105...
  • Page 148: 401] Trunk Line/Pbx Line

    Use Volume button to scroll through options Press Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 5 0 3 B NONE 2-106 Samsung Business Communications...
  • Page 149: 402] Trunk Dial Type

    Press Right Soft buttons to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 5 0 6 B MMC 501 SYSTEM TIMERS MMC 503 TRUNK-WIDE TIMERS Samsung Business Communications 2-107...
  • Page 150: 403] Trunk Toll Class

    L L] TOLL CLASS Select all. 1:F-STN 2:F_STN 3) Dial ring plan number.(1~6) [704] TOLL CLASS : F-STN 2:F-STN Use Volume button to scroll through ring plan numbers and press Right Soft button to move the cursor. 2-108 Samsung Business Communications...
  • Page 151 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 5 0 9 B MMC 301 ASSIGN STATION COS MMC 507 ASSIGN RING PLAN TIME MMC 701 ASSIGN COS CONTENTS Samsung Business Communications 2-109...
  • Page 152: 404] Trunk Name

    Press Right Soft button to return to step 2. E LECOMS 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 5 1 3 B MMC 104 STATION NAME MMC 405 TRUNK CO TEL NUMBER 2-110 Samsung Business Communications...
  • Page 153: 405] Trunk Co Tel Number

    4) Press Right Soft button to return to step 2. Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 5 1 7 B MMC 404 TRUNK NAME Samsung Business Communications 2-111...
  • Page 154: 406] Trunk Ring Assignment

    5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 5 2 0 B MMC 202 CHANGE FEATURE PASSCODES MMC 507 ASSIGN RING PLAN TIME MMC 601 ASSIGN STATION GROUP 2-112 Samsung Business Communications...
  • Page 155: 407] Forced Trunk Release

    [704] TRK RELS. (Pressing 1 or 0 will return to step 2) RELEASE?_Y:1,N:0 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 5 2 3 B NONE Samsung Business Communications 2-113...
  • Page 156: 408] Assign Trunk Moh Source

    Press Volume button to select option and press Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 5 2 7 B MMC 756 ASSIGN VMMOH 2-114 Samsung Business Communications...
  • Page 157: 409] Trunk Status Read

    Right Soft button to advance cursor. 3) Enter desired option 00-19.(e.g., 01) [704] TRK STATUS Y PE:LOOP TRUNK Press Volume button to make selection. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. Samsung Business Communications 2-115...
  • Page 158 MMC 401 TRUNK LINE/PBX LINE MMC 402 TRUNK DIAL TYPE MMC 403 TRUNK TOLL CLASS MMC 404 TRUNK NAME MMC 406 TRUNK RING ASSIGNMENT MMC 408 ASSIGN TRUNK MUSIC ON HOLD SOURCE MMC 410 ASSIGN DISA TRUNK 2-116 Samsung Business Communications...
  • Page 159: 410] Assign Disa Trunk

    Press Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 5 3 4 B MMC 500 SYSTEM-WIDE COUNTERS Samsung Business Communications 2-117...
  • Page 160: 411] Assign E1 Signal Type

    RUSSIA, E/D, I/O, HARRIS, PABX, UK_EM RU_USER_ROM RUSSIA, E/D, I/O, USER ROM AR_WINK ARGENTINA, E/D, I/O, WINK AR_WINK_MPD ARGENTINA, E/D, I/O, WINK-MPD CHINA_NO1 CHINA, E/D, I/O, NO.1 OF CHINA POL_WINK_MPD POLAND, E/D, I/O, POLAND WINK MPD UNUSE 2-118 Samsung Business Communications...
  • Page 161 1 0 6 7 B MMC 400 CUSTOMER ON/OFF PER TRUNK MMC 401 TRUNK LINE/PBX LINE MMC 402 TRUNK DIAL TYPE MMC 403 TRUNK TOLL CLASS MMC 404 TRUNK NAME MMC 405 TRUNK CO TEL NUMBER Samsung Business Communications 2-119...
  • Page 162 PRI OPTIONS MMC 421 MSN DIGIT MMC 422 TRUNK COS MMC 423 S/T MODE MMC 424 BRI S0 MAPPING MMC 426 TRUNK GAIN CONTROL MMC 433 COST RATE MMC 434 CONNECTION STATUS MMC 436 TRUNK TMC GAIN 2-120 Samsung Business Communications...
  • Page 163: 412] Assign Trunk Signal

    DIRECT BACK C ONDITIONS 5 3 9 B An analogue E & M/DID Trunk card must be installed in the OfficeServ 7000 Series system. Or, the ‘NO E & M/DID TRUNK’ message is displayed. MMC [412] This MMC is not shown in OfficeServ 7030.
  • Page 164 CHAPTER 2. MMC Programming R ELATED ITEMS 5 4 2 B MMC 416 ASSIGN E & M/DID RINGDOWN MMC 714 DID NUMBER AND NAME TRANSLATION 2-122 Samsung Business Communications...
  • Page 165: 413] Vms Call Type

    VOICE MAIL C ONDITIONS 5 4 3 B This program applies to the SVM-800 voice mail system which is no longer supplied or supported by Samsung. MMC [413] This MMC is not shown in OfficeServ 7100 / OfficeServ 7030 . OfficeServ 7100 OfficeServ 7030 supports embedded VM only.
  • Page 166: 414] Mpd/Prs Signal

    1) Press Transfer button and enter 414. 0 1] TRK PRS Display shows: NONE 2) Dial desired trunk number.(e.g., 705) [705] TRK PRS O NE Press Volume button to select trunk and use Right Soft button to move cursor. 2-124 Samsung Business Communications...
  • Page 167 Left or Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 5 5 0 B MMC503 TRUNK-WIDE TIMERS Samsung Business Communications 2-125...
  • Page 168: 415] Report Trunk Abandon Data

    Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 5 5 3 B MMC 725 SMDR OPTIONS 2-126 Samsung Business Communications...
  • Page 169: 416] Assign E & M/Did Ringdown

    2) Enter desired trunk number.(e.g., 705) [705] EM/DD RING O LLOW INCOM DGT Press Volume button to make selection and press Right Soft button to move cursor. [ALL] EM/DD RING Select all trunks. O LLOW INCOM DGT Samsung Business Communications 2-127...
  • Page 170 [705] EM/DD RING NO. RCV DIGIT:00 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 5 5 7 B MMC 714 DID NUMBER AND NAME TRANSLATION 2-128 Samsung Business Communications...
  • Page 171: 417] E1/Pri Crc4 Option

    Press Volume button to select and press Right Soft button. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 5 6 1 B MMC 418 BRI & PRI CARD RESTART Samsung Business Communications 2-129...
  • Page 172: 418] Bri And Pri Card Restart

    5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 5 6 5 B MMC 419 BRI OPTIONS MMC 420 PRI OPTIONS MMC 423 S/T MODE MMC 424 BRI S0 MAPPING 2-130 Samsung Business Communications...
  • Page 173: 419] Bri Options

    Used to select the type of the Calling Party Number to send to the network. UNKNOWN Unknown number INT.NAT International number NATIONAL National number NETWORK Network specific number SUBSCRIB Subscriber number ABBREV Abbreviated number EXTEN Local number Samsung Business Communications 2-131...
  • Page 174 BRI is free.(e.g., Exclusive channel selection) POWER FEED This field determines if power to a BRI access will be supplied.(YES or 2-132 Samsung Business Communications...
  • Page 175 3) Select option item. [727] BRI-TRK H ANNEL ANY:NO Press Volume button to select option item and press Right Soft button. [727] BRI-TRK R I MODE:P-M MSN [727] BRI-TRK L SEND :OVERLAP [727] BRI-TRK CLIP TABLE :NONE Samsung Business Communications 2-133...
  • Page 176 5 6 9 B MMC 323 CALLING PARTY NUMBER MMC 405 TRUNK CO TEL NUMBER MMC 418 BRI & PRI CARD RESTART MMC 421 MSN DIGIT MMC 423 S/T MODE MMC 714 DID NAME AND NUMBER TRANSLATION 2-134 Samsung Business Communications...
  • Page 177: 420] Pri Options

    Used to select the type of the Calling Party Number Plan to send to the network. UNKNOWN Unknown numbering plan ISDN ISDN numbering plan(CCITT E.163-164) DATA Data numbering plan(CCITT X.121) TELEX Telex numbering plan(CCITT F.69) NATIONAL National standard numbering plan PRIVATE Private numbering plan EXTEN Local numbering plan Samsung Business Communications 2-135...
  • Page 178 This MMC is not shown in OfficeServ 7030. D EFAULT DATA 5 7 1 B CHANNEL ANY: YES PRI MODE: DDI DLSEND: OVERLAP CLIP TABLE: 1 NB TYPE: UNKNOWN NB PLAN: ISDN CLIR w NUMB: OFF 2-136 Samsung Business Communications...
  • Page 179 CHAPTER 2. MMC Programming SAME CONNID: OFF CD PLAN: UNKNOWN CD TYPE: UNKNOWN TIME SYNC : OFF Samsung Business Communications 2-137...
  • Page 180 Press Speaker button to advance to next MMC. R ELATED ITEMS 5 7 3 B MMC 323 CALLING PARTY NUMBER MMC 405 TRUNK CO TEL NUMBER MMC 418 BRI & PRI CARD RESTART MMC 714 DID NAME AND NUMBER TRANSLATION 2-138 Samsung Business Communications...
  • Page 181: 421] Msn Digit

    Press Volume button to select location and press Right Soft button to move cursor. 4) Enter digits to be translated(e.g., 4603881) via [704] MSN DGT ( dial keypad and press Right Soft button to move DGT:4603881 Samsung Business Communications 2-139...
  • Page 182 CHAPTER 2. MMC Programming to the destination selection.(Max. Digit is 12) 2-140 Samsung Business Communications...
  • Page 183 Press Volume button to make selection and press Right Soft button. 8) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 5 7 7 B MMC 423 S/T MODE Samsung Business Communications 2-141...
  • Page 184: 422] Trunk Cos

    Use Volume button to scroll through classes of service and press Right Soft button to return to step 2. Use Volume button to scroll through classes of service and press Left Soft button to return to the previous step. 2-142 Samsung Business Communications...
  • Page 185 CHAPTER 2. MMC Programming 5) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 5 8 0 B MMC 701 ASSIGN COS CONTENTS Samsung Business Communications 2-143...
  • Page 186: 423] S/T Mode

    4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 5 8 4 B MMC 424 BRI S0 MAPPING MMC 418 BRI AND PRI CARD RESTART MMC 419 BRI OPTIONS MMC 421 MSN DIGIT 2-144 Samsung Business Communications...
  • Page 187: 424] Bri S0 Mapping

    Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 5 8 8 B MMC 419 BRI OPTIONS MMC 423 S/T MODE Samsung Business Communications 2-145...
  • Page 188: Cid Trunks

    R ELATED ITEMS 5 9 2 B Program 119 Specify the way to display CID. Program 312 Specify if the CID is allowed. Program 608 Assign the block to save CID. Program 728 Enter the CID Conversion Table. 2-146 Samsung Business Communications...
  • Page 189 Right Soft button to move cursor and RX:+0.0 TX:- return to step 1. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 5 9 5 B NONE Samsung Business Communications 2-147...
  • Page 190: 428] Assign Trunk/Trunk Use

    Press Volume button to select YES/NO and press Right Soft button to move cursor. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 5 9 8 B MMC 614 STATION/TRUNK USE GROUP 2-148 Samsung Business Communications...
  • Page 191: 432] Set H-Trk

    [705] SET H-TRK press Right Soft button to move cursor. D ID 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 0 1 B NONE Samsung Business Communications 2-149...
  • Page 192: 433] Cost Rate

    Enter 1 for YES or 0 for NO and press Right Soft button to return to step 1. 4) Press Transfer button to save and exit. R ELATED ITEMS 6 0 4 B MMC 746 COSTING DIAL PLAN MMC 747 RATE CALCULATION TABLE 2-150 Samsung Business Communications...
  • Page 193: 434] Connection Status

    DISPLAY STATUS 0 1 IDLE 2) Enter station or trunk number. DISPLAY STATUS Display show connection status. 3 5 715 3) Enter another station or trunk. DISPLAY STATUS 3 5 715 Press Transfer button to exit. Samsung Business Communications 2-151...
  • Page 194 DISPLAY STATUS 0 1 IDLE 2) Enter invalid station or trunk number. DISPLAY STATUS Display show INVALID DATA: INVALID DATA 3) Enter another station or trunk. DISPLAY STATUS 0 1 IDLE Press Transfer button to exit. 2-152 Samsung Business Communications...
  • Page 195 2 5 MADE BUSY 3) Enter another station or trunk. DISPLAY STATUS 2 5 MADE BUSY Press Transfer button to exit. R ELATED ITEMS 6 0 7 B MMC 108 STATION STATUS MMC 409 TRUNK STATUS READ Samsung Business Communications 2-153...
  • Page 196: 436] Trunk Tmc Gain

    Right Soft button to move cursor and RX:+0 dB TX: 2 dB return to step 2. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 1 0 B NONE 2-154 Samsung Business Communications...
  • Page 197: 437] 16 Trunk Gain

    [Right] Soft button. 6) Press the [Transfer] button to store the data and com- 0 2] TRK TYPE:2 RX:2 TX:4 plete the procedure or press the [Speaker] button to store the data. Samsung Business Communications 2-155...
  • Page 198: 500] System-Wide Counters

    UCD group reaches this value. RANGE = 0-25. D EFAULT DATA 6 1 2 B SEE DESCRIPTION A CTION DISPLAY 6 1 3 B 1) Press Transfer button and enter 500. ALARM REM.CNTER Display shows: 2-156 Samsung Business Communications...
  • Page 199 If entry is valid, system will return to step 2. 00 02 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 1 4 B NONE Samsung Business Communications 2-157...
  • Page 200: 501] System Timers

    Allocation timer - the length of time the DSP is in-circuit to decode analogue Caller ID. This option is not shown in OfficeServ 7100 OfficeServ 7030. CLI DISPLAY TIME 1-25 SEC The amount of time that the Caller ID information remains on the phone’s display. 2-158 Samsung Business Communications...
  • Page 201 CHAPTER 2. MMC Programming CO CLEAR TIME 0-250 SEC The length of time a Direct Trunk Select key remains busy after cleardown. Samsung Business Communications 2-159...
  • Page 202 1-250 SEC This timer controls the duration of ringing at the door ring destination before automatically cancelling. E-HOLD RECALL TM 0-250 SEC This timer controls how long a call is held exclusively at a station before recalling. 2-160 Samsung Business Communications...
  • Page 203 MCL DELAY TIME 0-9 SEC This timer controls the time when the system should start transmitting Authorisation Code after sending MCL access code(Cable& Wireless 131 access). Available in UK only. Samsung Business Communications 2-161...
  • Page 204 0-250 SEC This timer determines the time calls can be left on hold before recalling to the holding station. This is a system-wide timer. Setting the timer to 000 means that no recalling will take place. 2-162 Samsung Business Communications...
  • Page 205 When timers value is ‘0’ Some timers are disabled when their value is set to ‘0’. D EFAULT DATA 6 1 6 B SEE DESCRIPTION SOME TIMERS DEPEND ON COUNTRY Samsung Business Communications 2-163...
  • Page 206 KMMC LOCK OUT TM returns to step 2 with new value. 060 SEC 250 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 1 8 B NONE 2-164 Samsung Business Communications...
  • Page 207: 502] Station-Wide Timers

    D EFAULT DATA 6 2 0 B NO ANS FWD: 015 SEC DTMF DUR: 100 MSEC F-DGT DELY: 600 MSEC OFFHK SEL: 008 SEC EFWD DELAY: 010 SEC CC RNG DLY: 010 SEC PING RING : 000 SEC Samsung Business Communications 2-165...
  • Page 208 System returns to step 2. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 2 2 B MMC 102 CALL FORWARD MMC 306 HOT LINE/OFF HOOK SELECTION 2-166 Samsung Business Communications...
  • Page 209: 503] Trunk-Wide Timers

    DTMF signal, over the 500ms will be serviced as 100 ms. MFR DLY TM This is a delay time to allocate the MFR after 0-25 SEC incoming trunk is detected. This is to prevent the wrong detection of DTMF signal by noise. Samsung Business Communications 2-167...
  • Page 210 4) Enter new timer value.(must be four digits, e.g., 0200) [704] DTMF DUR. System returns to step 2. 0100 MS 0200 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 2 5 B NONE 2-168 Samsung Business Communications...
  • Page 211: 504] Pulse Make/Break Ratio

    PULSE PER SECOND System returns to step 2. 10 PPS 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 2 8 B MMC 402 TRUNK DIAL TYPE Samsung Business Communications 2-169...
  • Page 212: 505] Assign Date And Time

    3) Verify time and date. OLD:0111121:1445 Re-enter if necessary. NEW:YYMMDDW:HHMM 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 3 1 B MMC 861 SYSTEM OPTIONS(AUTO UPDATE TIME) 2-170 Samsung Business Communications...
  • Page 213: 506] Tone Cadence

    11 types of tone and three types of tone provided from Central Office or a PBX system can be detected. When changing the MMC [506] MMC [506] should not be changed from the default levels without the assistance of the local SAMSUNG distributor. Item Description BUSY TONE The called station is busy.
  • Page 214 Left Soft button retreats cursor. If valid entry, system returns to step 2. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 3 4 B NONE 2-172 Samsung Business Communications...
  • Page 215: 507] Assign Ring Plan Time

    C ONDITIONS 6 3 5 B When using a Samsung built-in Voice Mail card that only has day/night mode, the day/night must be set for each RING PLAN in MMC 758, VM DAY/NIGHT. Ring Plans must be programmed in sequence.(RP 1, 2, 3, 4, etc.) A Ring Plan cannot be omitted.(i.e.
  • Page 216 If valid, system returns to step 2. Begin again. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 3 8 B MMC 722 STATION KEY PROGRAMMING MMC 723 SYSTEM KEY PROGRAMMING 2-174 Samsung Business Communications...
  • Page 217: 508] Call Cost

    110 % ™ System returns to step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 4 1 B MMC 110 STATION ON/OFF(CALL COST OPTION) Samsung Business Communications 2-175...
  • Page 218: 510] Sli Ring Cadence

    Provides the ability to customize the ring cadence for single line ports on a system-wide basis. There are five cadences available. When changing the MMC [510] MMC [510] should not be changed from the default levels without the assistance of the local SAMSUNG distributor. Item Description STN RING This is the cadence intercom calls will ring at.
  • Page 219 CHAPTER 2. MMC Programming 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 4 4 B NONE Samsung Business Communications 2-177...
  • Page 220: 511] Msg Waiting Lamp Cadence

    Press Left Soft button to move cursor back. If valid entry, system returns to step 2. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 6 4 8 B NONE 2-178 Samsung Business Communications...
  • Page 221: 512] Holiday Assignment

    6) Dial date for holiday using the dial keypad. ASSIGN HOLIDAY (e.g., 0704) 05:0704 7) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 5 1 B MMC 507 ASSIGN RING PLAN TIME Samsung Business Communications 2-179...
  • Page 222: 513] Hotel Timer

    ROOM CLEAN TIME system returns to step 2. HH:MM : 11:30 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 6 5 5 B NONE 2-180 Samsung Business Communications...
  • Page 223: 514] Tone Source

    Press Volume button to select tone number and press Right Soft button to store. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 6 5 8 B NONE Samsung Business Communications 2-181...
  • Page 224: 515] Daylight Assignment

    4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. R ELATED ITEMS 6 6 1 B MMC 505 ASSIGN DATE AND TIME MMC 861 SYSTEM OPTIONS(AUTO UPDATE TIME) 2-182 Samsung Business Communications...
  • Page 225: 600] Assign Operator Group

    Press Volume button to select group and press Right Soft button. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 6 4 B MMC 601 ASSIGN STATION GROUP Samsung Business Communications 2-183...
  • Page 226: 601] Assign Station Group

    No external device need be installed to provide an announcement. b) Multiple callers can hear the announcement(s) simultaneously. c) Callers hearing the announcement will be transferred to a free UCD group member(agent) as soon as the agent becomes available. 2-184 Samsung Business Communications...
  • Page 227 MMC 300. This ring mode option is not available for UCD or VMAA groups. The SGR INC BUSY option is not available for unconditional ring mode. Samsung Business Communications 2-185...
  • Page 228 F-STN, this operates according to the extension coloring message of the receiving group member. (0~9998, F-STN, NONE) Calls to a group Calls to a group do not follow the call forwarding instructions of any station in the group. 2-186 Samsung Business Communications...
  • Page 229 6) Dial ring option.(0-2, e.g., 0) [505] STN GROUP RING:SEQUENTIAL Press Volume button to make selection. Press Left Soft button to move cursor back to RING or press Right Soft button to return to step 2. Samsung Business Communications 2-187...
  • Page 230 Press Left Soft button to return to step 2. 8) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 6 8 B MMC 203 ASSIGN UA DEVICE MMC 204 COMMON BELL CONTROL 2-188 Samsung Business Communications...
  • Page 231: 602] Station Group Name

    4) Press Left or Right Soft button to return to step 2. Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 7 2 B MMC 104 STATION NAME MMC 404 TRUNK NAME MMC 601 ASSIGN STATION GROUP Samsung Business Communications 2-189...
  • Page 232: 603] Assign Trunk Group

    4) Press Right Soft button to move cursor to number TRK GROUP of member and enter valid member number MEMBER 05:NONE (e.g., 05) via dial keypad. Press Volume button to make selection and press Right Soft button to move cursor. 2-190 Samsung Business Communications...
  • Page 233 LCR DIGIT TABLE MMC 711 LCR TIME TABLE MMC 712 LCR ROUTE TABLE MMC 713 LCR MODIFY DIGIT TABLE V oIP PROGRAMMING 1 0 7 1 B MMC 832 VoIP ACCESS CODE MMC 833 VoIP IP TABLE Samsung Business Communications 2-191...
  • Page 234: 604] Assign Station To

    Press Volume button to make selection and press Right Soft button to move cursor. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 7 8 B NONE 2-192 Samsung Business Communications...
  • Page 235: 605] Assign External

    MEMBER 3 :3751 Press Left Soft button to return to step 3 above. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 8 1 B NONE Samsung Business Communications 2-193...
  • Page 236: 606] Assign Speed Block

    Right Soft button to advance cursor. EXT201:1 4) Enter desired extension number via dial keypad. FREE LIST:20 (e.g., 205) EXT205:1 Press Volume button to make selection and press Right Soft button to advance cursor. 2-194 Samsung Business Communications...
  • Page 237 Press Speaker button to advance to next MMC. R ELATED ITEMS 6 8 4 B MMC 105 STATION SPEED DIAL MMC 106 STATION SPEED DIAL NAME MMC 705 ASSIGN SYSTEM SPEED DIAL MMC 706 SYSTEM SPEED DIAL BY NAME Samsung Business Communications 2-195...
  • Page 238: 607] Ucd Options

    Example: If this counter is set to 02, callers reaching a busy group will hear the first UCD message, be placed on hold, hear the second UCD message, be placed on hold, and finally hear the second message again before being transferred to the final destination. 2-196 Samsung Business Communications...
  • Page 239 UCD calls after hanging up from the last one. This is to allow agents to complete work associated with the previous call before the next call begins ringing. The range is 000-250. The default is 010. Samsung Business Communications 2-197...
  • Page 240 RETRY COUNT: 03 FINAL DEST: 500 RING NEXT: 30 SEC UCD RECALL: 10 SEC MOH SOURCE: NONE WRAP-UP: 10 SEC AUTO LOG OUT: ON ALL OUT TO FINAL: OFF AGENT PIN NO: OFF GROUP BUSY NEXT: OFF 2-198 Samsung Business Communications...
  • Page 241 Press Right Soft button to return to step 3. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 8 7 B MMC 601 ASSIGN STATION GROUP Samsung Business Communications 2-199...
  • Page 242: 608] Assign Review Block

    4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 9 0 B MMC 119 CALLER ID DISPLAY MMC 312 ALLOW CALLER ID MMC 725 SMDR OPTIONS 2-200 Samsung Business Communications...
  • Page 243: 609] Call Log Block

    Press Volume button to make selection. Press Hold button to delete bin(s). 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 9 3 B NONE Samsung Business Communications 2-201...
  • Page 244: 611] Allow Text Messaging

    3) Specify whether text messaging will be used or not. [202] TMSG STN S ED 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 6 9 6 B MMC 117 EDIT TEXT MESSAGE 2-202 Samsung Business Communications...
  • Page 245: 612] Allow Group Conference

    3) Specify whether Group Conference feature can be [205] CONF STN used or not. USED 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 0 0 B MMC 118 CONFERENCE GROUP Samsung Business Communications 2-203...
  • Page 246: 614] Station/Trunk Use Group

    5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 0 4 B MMC 304 ASSIGN EXTENSION/TRUNK USE MMC 317 ASSIGN STATION/STATION USE MMC 428 ASSIGN TRUNK/TRUNK USE 2-204 Samsung Business Communications...
  • Page 247: 615] Mgi Group

    IP network. PUB IP NTWK This determines what MGI ports can be used for enhanced proprietary Samsung VoIP networking between OfficeServ 7000 Series systems on a public IP network. VOIP TRUNK This determines what MGI ports can be used as industry-standard H.323 or SIP VoIP trunks for communications across a private network...
  • Page 248 O CAL ITP Soft button to store data and return to step 1. MODE:SEQUENTIAL 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 0 7 B NONE 2-206 Samsung Business Communications...
  • Page 249: 616] Mgi User

    Press Volume button to select an MGI user and press Right Soft button to store and move cursor. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 1 0 B NONE Samsung Business Communications 2-207...
  • Page 250: 700] Copy Cos Contents

    COS CONTENTS(06) Right Soft to advance cursor. TOLL LEVEL:A 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 1 4 B MMC 701 ASSIGN COS CONTENTS 2-208 Samsung Business Communications...
  • Page 251: 701] Assign Cos Contents

    Do Not Disturb Override DOOR Door ring answer Direct station select Direct trunk select EXT AREC Intercom call automatic record (SVM-800) (This option is not shown in OfficeServ 7100/ OfficeServ 7030) EXT FWD External call forward Samsung Business Communications 2-209...
  • Page 252 PAGE 6 Page zone 6 Paging PAGE 7 Page zone 7 Paging PAGE 8 Page zone 8 Paging PAGE 9 Page zone 9 Paging PAGE * Page zone * Paging PICKUP Call pickup Privacy Release and Bridge 2-210 Samsung Business Communications...
  • Page 253 (01~11 in OfficeServ 7100) (01~05 in OfficeServ 7030) CALL TO BIVMS STN 01-16 SVMi port 01~16 calling BIVMS STN(SVMi). (01~04 in OfficeServ 7100) (01~02 in OfficeServ 7030) D EFAULT DATA 7 1 5 B SEE DESCRIPTION Samsung Business Communications 2-211...
  • Page 254 Right Soft button to return to step 4. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 1 7 B MMC 700 COPY COS CONTENTS 2-212 Samsung Business Communications...
  • Page 255: 702] Toll Deny Table

    DENY(001):BCDEFG under toll class mark.(e.g., E). :000 Enter a 1 for ‘Yes’ or 0 for ‘No’. Press Right Soft button to store and return to step 1. Press Left Soft button to return to step 2. Samsung Business Communications 2-213...
  • Page 256 CHAPTER 2. MMC Programming 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 2 1 B MMC 703 TOLL ALLOWANCE TABLE MMC 704 ASSIGN WILD CHARACTER 2-214 Samsung Business Communications...
  • Page 257: 703] Toll Allowance Table

    Press Volume button to select index and press Right Soft button to move cursor. 3) Enter toll pattern via dial pad.(e.g., 202) ALOW(005):BCDEFG :000000 Enter wild card(e.g., 20X) and press Right Soft ALOW(005):BCDEFG button to move cursor to COS options. :000000 Samsung Business Communications 2-215...
  • Page 258 Press Left Soft button to return to step 2. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 2 5 B MMC 702 TOLL DENY TABLE MMC 704 ASSIGN WILD CHARACTER 2-216 Samsung Business Communications...
  • Page 259: 704] Assign Wild Character

    Press Right Soft button to return to step 1. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 2 8 B MMC 702 TOLL DENY TABLE MMC 703 TOLL ALLOWANCE TABLE Samsung Business Communications 2-217...
  • Page 260: 705] Assign System Speed Dial

    24 digits(digits will scroll under) 505:9–12122345678 and press Right Soft button to return to step 2. 4) Press F key to toggle to MMC 706 step 3 to enter SYS SPEED NAME name. 505: 2-218 Samsung Business Communications...
  • Page 261 (The speed dial name must exist) 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 3 2 B MMC 606 ASSIGN SPEED BLOCK MMC 706 SYSTEM SPEED DIAL BY NAME Samsung Business Communications 2-219...
  • Page 262: 706] System Speed Dial By Name

    1) Press Transfer button and enter 706. SYS SPEED NAME Display shows: 0 0: 2) Dial system speed entry number.(e.g., 505) SYS SPEED NAME 505: Press Volume button to select entry number and press Right Soft button to move cursor. 2-220 Samsung Business Communications...
  • Page 263 5) Press Right Soft button to return to step 2 above. Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 3 7 B MMC 606 ASSIGN SPEED BLOCK MMC 705 ASSIGN SYSTEM SPEED DIAL Samsung Business Communications 2-221...
  • Page 264: 707] Authorization Code

    Soft button to select and return to step 2. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 4 0 B MMC 305 ASSIGN FORCED CODE MMC 701 ASSIGN COS CONTENTS 2-222 Samsung Business Communications...
  • Page 265: 708] Account Code

    005:123 to move cursor back to step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 4 3 B MMC 305 ASSIGN FORCED CODE Samsung Business Communications 2-223...
  • Page 266: 709] Toll Pass Code/Special Code Table

    OVRD USE TRK GRP. Press Volume button to make selection and press Right Soft button to move cursor. 3) Enter index number.(e.g., 3) TOLL OVERRIDE Press Volume button to make selection and press Right Soft button to move cursor. 2-224 Samsung Business Communications...
  • Page 267 TOLL DENY TABLE MMC 703 TOLL ALLOWANCE TABLE MMC 305 ASSIGN FORCED CODE T OLL RESTRICTION 1 0 7 2 B MMC 702 TOLL DENY TABLE MMC 703 TOLL ALLOWANCE TABLE MMC 704 ASSIGN WILD CHARACTER Samsung Business Communications 2-225...
  • Page 268: 710] Lcr Digit Table

    Valid entry will return you to step 1. LENGTH:10 RT: 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 4 9 B MMC 712 LCR ROUTE TABLE 2-226 Samsung Business Communications...
  • Page 269: 711] Lcr Time Table

    6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 5 2 B MMC 710 LCR DIGIT TABLE MMC 712 LCR ROUTE TABLE MMC 713 LCR MODIFY DIGIT TABLE Samsung Business Communications 2-227...
  • Page 270: 712] Lcr Route Table

    Press Volume button to selected COS and press Right Soft button to move cursor. 5) Dial TRUNK GROUP access code.(e.g., 801) LCR ROUTE (05:2) C:4 G:801 M: Press Volume button to selected access code and press Right Soft button to move cursor. 2-228 Samsung Business Communications...
  • Page 271 Press Speaker button to advance to next MMC. R ELATED ITEMS 7 5 5 B MMC 310 LCR CLASS OF SERVICE MMC 710 LCR DIGIT TABLE MMC 711 LCR TIME TABLE MMC 713 LCR MODIFY DIGIT TABLE Samsung Business Communications 2-229...
  • Page 272: 713] Lcr Modify Digit Table

    Press Right Soft button to skip step and move cursor to next step. 4) Enter digits to be inserted.(e.g., 10288) LCR MODIFY (005) I:10288_ Press Right Soft button to skip step or to store information and advance to next step. 2-230 Samsung Business Communications...
  • Page 273 Press Speaker button to advance to next MMC. R ELATED ITEMS 7 5 8 B MMC 310 LCR CLASS OF SERVICE MMC 710 LCR DIGIT TABLE MMC 711 LCR TIME TABLE MMC 712 LCR ROUTE TABLE Samsung Business Communications 2-231...
  • Page 274: 714] Did Number And Name Translation

    16. NAME Enter up to 11 characters to identify call. Refer to MMC 104, STATION NAME, for how to enter the name. TONE Assigns ring tone to DLI port. CADENCE Assigns ring cadence to SLT port. 2-232 Samsung Business Communications...
  • Page 275 Right Soft buttons to advance to next step. 6) Enter station or group number for each Ring Plan DID DIGIT (005) destination via dial keypad.(e.g., 530) 1:53 Press Volume button to make selection and press Right Soft button to advance to next step. Samsung Business Communications 2-233...
  • Page 276 11) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 6 2 B T RUNK PROGRAMMING 1 0 7 3 B Refer to RELATED ITEMS in MMC 411, ASSIGN E1 SIGNAL TYPE. 2-234 Samsung Business Communications...
  • Page 277: 715] Programmed Station Message

    Press Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 6 6 B MMC 115 SET PROGRAMMED MESSAGE Samsung Business Communications 2-235...
  • Page 278: 716] Uk Lcr Option

    3) Enter number 0-16. NETWORK CODE 02:_ USE:NONE Press Volume buttons to select number and press Right Soft button to move cursor. 4) Enter network access code via dial keypad. NETWORK CODE 02:1234 USE: O NE 2-236 Samsung Business Communications...
  • Page 279 7 6 9 B MMC 400 CUSTOMER ON/OFF PER TRUNK MMC 310 LCR CLASS OF SERVICE MMC 710 LCR DIGIT TABLE MMC 711 LCR TIME TABLE MMC 712 LCR ROUTE TABLE MMC 713 LCR MODIFY DIGIT TABLE Samsung Business Communications 2-237...
  • Page 280: 717] Ucd Agent Id

    Right Soft button to select and return to step 2. Select all groups. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 7 2 B MMC 607 UCD OPTIONS 2-238 Samsung Business Communications...
  • Page 281: 718] My Area Code

    4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 7 5 B T RUNK PROGRAMMING 1 0 7 4 B Refer to ‘RELATED ITEMS’ in MMC 411, ASSIGN E1 SIGNAL TYPE Samsung Business Communications 2-239...
  • Page 282: 719] Idle Display

    Right Soft button to save and move to step 2. WELCOME TO AB 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 7 9 B MMC 120 LARGE LCD OPTIONS 2-240 Samsung Business Communications...
  • Page 283: 720] Copy Key Programming

    4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 8 2 B MMC 107 KEY EXTENDER MMC 721 SAVE STATION KEY PROGRAMMING MMC 722 STATION KEY PROGRAMMING MMC 723 SYSTEM KEY PROGRAMMING Samsung Business Communications 2-241...
  • Page 284: 721] Save Station Key Programming

    4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 8 6 B MMC 107 KEY EXTENDER MMC 722 STATION KEY PROGRAMMING MMC 723 SYSTEM KEY PROGRAMMING 2-242 Samsung Business Communications...
  • Page 285: 722] Station Key Programming

    (Including or excluding in a temporary answer group) ALARM ALARM(OfficeServ 7100 / OfficeServ 7030 does not support this key) AN/RLS ANSWER/RELEASE NEW CALL BARGE BARGE-IN NAME NUMBER DATE BILL BILL(Hotel Feature) NOCLIP NO CID SEND BLOCK OHVA BLOCK NETWORK PAGE Samsung Business Communications 2-243...
  • Page 286 CHAPTER 2. MMC Programming BOOTH BOOTH(Hotel Feature) NETWORK STATION BOSS BOSS/SECRETARY CID NEXT 2-244 Samsung Business Communications...
  • Page 287 TO SECRETARY DLOCK DOOR LOCK SMDR Display, Print and Deletion of the Call Charge DO NOT DISTURB SAVED NUMBER REDIAL DNDO DO NOT DISTURB UCD SUPERVISOR OVERRIDE DIRECT PICKUP SPEED DIAL DROP CALL DROP SPKR SPEAKER Samsung Business Communications 2-245...
  • Page 288 CHAPTER 2. MMC Programming DSS KEY SSET ISDN SUPPLEMENTARY SERVICE 2-246 Samsung Business Communications...
  • Page 289 IRET ISDN 3 PTY RETRIEVE VMSREC VMS RECORD(Requires SVM) (OfficeServ 7100 / OfficeServ 7030 does not support this key) ISPY CID SPY VMSVAC VMS VACANT(Requires SVM) (OfficeServ 7100 / OfficeServ 7030 does not support this key) Samsung Business Communications 2-247...
  • Page 290 2. 5) Enter extender if required.(e.g., 03) [201] KEY PROG. 18:NONE GPIK03 Press Volume button to make selection and press Right Soft button to return to step 2. 2-248 Samsung Business Communications...
  • Page 291 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 8 9 B MMC 107 KEY EXTENDER MMC 720 COPY KEY PROGRAMMING MMC 721 SAVE STATION KEY PROGRAMMING Samsung Business Communications 2-249...
  • Page 292: 723] System Key Programming

    DGPALM FAUTO DIAL 4 GPIK HDSET ICONF DIAL 5 LANREQ LANREQ LANREQ DIAL 6 MMPA OHVA DIAL 7 PAGE PAGE SETDND DIAL 8 DIAL 9 WAKEUP XCHIN WAKEUP WAKEUP See Programmable Button Assignments in MMC 722. 2-250 Samsung Business Communications...
  • Page 293 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 9 2 B MMC 107 KEY EXTENDER MMC 720 COPY KEY PROGRAMMING MMC 721 SAVE STATION KEY PROGRAMMING Samsung Business Communications 2-251...
  • Page 294: 724] Dial Numbering Plan

    This is where directory numbers for BRI station ports are changed or assigned. NTWK LCR DIAL NO This is where additional LCR access codes are entered if two or more OfficeServ 7000 Series systems are networked together. 2-252 Samsung Business Communications...
  • Page 295 WLAN DIAL NO, This is where IP-based station directory numbers are changed or assigned. SPNET DIAL NO This is where Samsung proprietary switch-to-switch VoIP networking trunk signalling port directory numbers are changed or assigned. H323 TRK DIAL NO This is where VoIP H.323 trunk signalling port directory numbers are changed or assigned.
  • Page 296 Please remember that this program is system-wide. NETWORK NUMBER This is where additional LCR access codes are entered if two or more OfficeServ 7000 Series systems are net- worked together. F EATURE NUMBERING DIAL KEYPAD 1 0 7 7 B...
  • Page 297 DO NOT DISTURB OVERRIDE E-LCR1 NONE Extended Least Cost Routing 1 E-LCR2 NONE Extended Least Cost Routing 2 E-LCR3 NONE Extended Least Cost Routing 3 E-LCR4 NONE Extended Least Cost Routing 4 FAUTO FORCED AUTO ANSWER Samsung Business Communications 2-255...
  • Page 298 PICKUP PAGE HOLD PARK NONE CALL PARK ORBIT PMSG PROGRAMMED STATION MESSAGE PTHR NONE PATH REPLACEMENT NONE ROOM BILL(Hotel Feature) REJECT NONE OHVA REJECT NONE RING PLAN NONE ROOM STATUS VIEW(Hotel Feature) NONE RING PLAN TIME OVERRIDE 2-256 Samsung Business Communications...
  • Page 299 NONE VMS VACANT(Requires SVM -800) (OfficeServ 7100/ OfficeServ 7030 does not support this.) WAKEUP WAKE UP(Hotel Feature) WCOS WORKING CLASS OF SERVICE D EFAULT DATA 7 9 3 B SEE DESCRIPTION FEATURE CODES DEPEND ON COUNTRY Samsung Business Communications 2-257...
  • Page 300 1 for YES for change or CHANGE?_Y:1,N:0 enter 0 for NO for no change. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 9 5 B ALL MMCs 2-258 Samsung Business Communications...
  • Page 301: 725] Smdr Options

    If this option is set to a numeric value, the selected last MASK digits of the number dialled field will be masked as asterisks(*) on the SMDR print out. Maximum masked digits is 18. First 4 digits will not mask. Samsung Business Communications 2-259...
  • Page 302 If set to YES the SMDR record will show Set RELOCATION Relocations. E NTERING CHARACTERS 7 9 6 B Refer to ‘ENTERING CHARACTERS’ in MMC 104, STATION NAME. D EFAULT DATA 7 9 7 B SEE DESCRIPTION SOME OPTIONS DEPEND ON COUNTRY 2-260 Samsung Business Communications...
  • Page 303 Soft button to save the data and return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 7 9 9 B MMC 300 CUSTOMER ON/OFF PER STATION Samsung Business Communications 2-261...
  • Page 304: 726] Vm/Aa Options

    DN1 field indicating that a trunk is ringing the VMAA port. If set to no, when the voice mail auto attendant system answers a call the system will not send trunk data in the DN1 field. 2-262 Samsung Business Communications...
  • Page 305 A call has OVERFLOWED to the VM/AA port from a station group. DID CALL A DID call has called the VM/AA port. MESSAGE A message button or message reply CALL feature code has been used to call the VM/AA port. Samsung Business Communications 2-263...
  • Page 306 4) If DTMF call progress tones are not enabled, the system sends regular call progress tones. 5) When a VM/AA port calls a station that is in the AUTO ANSWER or VOICE ANNOUNCE mode, the phone will be forced to ring. 2-264 Samsung Business Communications...
  • Page 307 A station(202) transfers a Trunk Line call(702) to a station(225) that is Call Forward All to a VM/AA group or port. When the transferring station hangs up(blind transfer) and the VM/AA group or port answers: [2] + [225] + [x] + [702] Samsung Business Communications 2-265...
  • Page 308 8 0 0 B SEE DESCRIPTION SOME OPTIONS DEPEND ON COUNTRY P ROGRAM BUTTONS 8 0 1 B Used to insert alpha character ‘A’ Used to insert alpha character ‘B’ Used to insert alpha character ‘C’ 2-266 Samsung Business Communications...
  • Page 309 Press Volume button for selection and press Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 8 0 3 B MMC 207 ASSIGN VM/AA PORT Samsung Business Communications 2-267...
  • Page 310: 727] System Version Display

    NO VERSION DATA SLI CARD C2-S3:16 SLI Cabinet and Slot shown: NO VERSION DATA 3) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 8 0 6 B NONE 2-268 Samsung Business Communications...
  • Page 311: 728] Cid Translation Table

    2. SAMSUNG TELECOM 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 8 1 0 B MMC 312 ALLOW CALLER ID MMC 608 ASSIGN REVIEW BLOCK Samsung Business Communications 2-269...
  • Page 312: 740] Station Pair

    4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 8 1 3 B MMC 102 CALL FORWARD MMC 301 ASSIGN STATION COS MMC 310 LCR CLASS OF SERVICE 2-270 Samsung Business Communications...
  • Page 313: 746] Costing Dial Plan

    Wild cards are checked after exact digits. If 1813 and 18∗∗ are entered, the system will check 1813 first. If no match is found, it will check 18∗∗. Samsung Business Communications 2-271...
  • Page 314 Right Soft button to save and return to step 2. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 8 1 6 B MMC 433 COST RATE MMC 747 RATE CALCULATION TABLE 2-272 Samsung Business Communications...
  • Page 315: 747] Rate Calculation Table

    Display shows: 1ST DUR :000 SEC 2) Dial COST RATE number 1-8.(e.g., 3) COST RATE (3) S T DUR :000 SEC Press Volume button to select COST RATE and press Right Soft button to move cursor. Samsung Business Communications 2-273...
  • Page 316 Right Soft button to save and return to step 3. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 8 1 9 B MMC 433 COST RATE MMC 746 COSTING DIAL PLAN 2-274 Samsung Business Communications...
  • Page 317: 750] Vm Card Restart

    CHAPTER 2. MMC Programming [ 750] VM CARD RESTART 1 9 1 B This MMC is used for the Samsung Built-In Voice Mail card. There are four options available in this MMC: Option Description MBX DOWNLOAD When the Built-In Voice Mail card starts, part of the power up procedure will download data from the system to determine time, date, what mailboxes to create, and system numbering plan.
  • Page 318 3) Press Volume button to make selection and VM RESTART press Right Soft button. RESET NOW ? YES 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 8 2 2 B NONE 2-276 Samsung Business Communications...
  • Page 319: 751] Assign Mailbox

    [ 751] ASSIGN MAILBOX 1 9 2 B This MMC is only used for the Samsung Built-In Voice Mail card. It assigns mailboxes to each station or group as required. During Voice Mail card power up, mailboxes will be created for each directory number with a ‘YES’ entry. Once the Voice Mail database has been created, new mailboxes can be added: Through Voice Mail administration.
  • Page 320: 752] Auto Record

    [ 752] AUTO RECORD 1 9 3 B This MMC is only used for the Samsung Built-In Voice Mail card. Specific stations in the phone system can be assigned to automatically record conversations. When this option is set, all incoming, all outgoing, or all calls(incoming and outgoing) can be recorded.
  • Page 321 Press Volume button to make selection and press Right Soft button to move cursor. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 8 3 0 B NONE Samsung Business Communications 2-279...
  • Page 322: 753] Warning Destination

    [ 753] WARNING DESTINATION 1 9 4 B This MMC is only used for the Samsung Built-In Voice Mail card. It provides an emergency destination for calls destined for the card if the card is removed or is offline. In addition, any calls that are forwarded to the card will not forward; they will remain ringing at the ‘fwd from’...
  • Page 323: 754] Vm Halt

    CHAPTER 2. MMC Programming [ 754] VM HALT 1 9 5 B This MMC is only used for the Samsung Built-In Voice Mail card or embeded VM in case of OfficeServ 7100 / OfficeServ 7030 system. It is used to halt the Voice Main card or embeded VM.
  • Page 324: 755] Vm Alarm

    CHAPTER 2. MMC Programming [ 755] VM ALARM 1 9 6 B This MMC is only used for the Samsung Built-In Voice Mail card or embeded VM in case of OfficeServ 7100 / OfficeServ 7030 system. It will generate an alarm message in the mailbox defined in MMC 751 whenever the Voice Mail disk drive reaches a threshold.
  • Page 325: 756] Assign Vmmoh

    CHAPTER 2. MMC Programming [ 756] ASSIGN VMMOH 1 9 7 B This MMC is only used for the Samsung Built-In Voice Mail card or embeded VM of OfficeServ 7100 / OfficeServ 7030 system. It is used to assign each port a Music-On-Hold source for the system from a sound file located on the Voice Mail card hard disk drive.
  • Page 326: 757] Vm In/Out

    CHAPTER 2. MMC Programming [ 757] VM IN/OUT 1 9 8 B This MMC is only used for the Samsung Built-In Voice Mail Card or embeded VM of OfficeServ 7100 / OfficeServ 7030 system. It is used to assign each Voice Mail port as used for incoming, outgoing or both-way calls.
  • Page 327: 758] Vm Day/Night

    CHAPTER 2. MMC Programming [ 758] VM DAY/NIGHT 1 9 9 B This MMC is only used for the Samsung Built-In Voice Mail card or embeded VM of OfficeServ 7100 / OfficeServ 7030 system. The card can operate in either a DAY or NIGHT operating mode.
  • Page 328: 759] Cli Ringing

    Calls from the programmed CID number will ring SLT’s with the DOOR ring cadence. Calls from the programmed CID number will ring SLT’s with the ALARM ring cadence. Calls from the programmed CID number will ring SLT’s with the CALLBACK ring cadence. 2-286 Samsung Business Communications...
  • Page 329 Press Volume button to make selection and press Right Soft button to move cursor. 9) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 8 5 1 B MMC 312 ALLOW CALLER ID Samsung Business Communications 2-287...
  • Page 330: 760] Item Cost Table

    This function can be used only when the Hotel function is enabled in MMC 813, HOTEL OPERATION. E NTERING CHARACTERS 8 5 3 B Refer to ‘ENTERING CHARACTERS’ in MMC 104, STATION NAME. D EFAULT DATA 8 5 4 B NO ENTRIES 2-288 Samsung Business Communications...
  • Page 331 Right Soft button to return to TAXES:11000000 step 2. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 8 5 6 B MMC 761 TAX RATE SETUP Samsung Business Communications 2-289...
  • Page 332: 761] Tax Rate Setup

    Right Soft button to move cursor. 3) Dial 0 for ‘%’, 1 for ‘C’ or 2 for ‘I’. TAX RATE (Refer to table above) TYPE:C VAL:00.00 Press Volume button to make selection and press Right Soft button to move cursor. 2-290 Samsung Business Communications...
  • Page 333 5) Enter name and press Right Soft button to return to TAX RATE step 2. NAME:MIA BED 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 8 6 1 B MMC 760 ITEM COST TABLE Samsung Business Communications 2-291...
  • Page 334: 762] Room Cost Rate

    3) Enter room cost rate.(001-999, e.g., 090) RM COST RAT(TUE) 100% : 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 8 6 5 B MMC 760 ITEM COST TABLE 2-292 Samsung Business Communications...
  • Page 335: 763] Second Lcr

    3) Enter IN DIGIT maximum 16 digits, and press (001) N DIGIT 1234 Right Soft button to move cursor. 4) Enter OUT DIGIT option number([1]). (001)OUT DIGIT Press Volume button to select OUT DIGIT and press Right Soft button to move cursor. Samsung Business Communications 2-293...
  • Page 336 Press Speaker button to advance to next MMC. R ELATED ITEMS 8 6 9 B MMC 310 LCR CLASS MMC 711 LCR TIME MMC 712 LCR ROUTE MMC 713 LCR MODF. DGT MMC 724 NUMBER PLAN 2-294 Samsung Business Communications...
  • Page 337: 764] Disa Password

    4) Press the [Transfer] button to complete the procedure or press the [Speaker] button to store the data. R ELATED ITEMS 8 7 3 B Program 210 Designate the system On/Off. Program 410 Extension DISA service Samsung Business Communications 2-295...
  • Page 338: 800] Enable Technician Program

    6) To log out and return to MMC 800, press Volume button to select DISABLE. Press Speaker button then Transfer to return to normal display. Programming option will time out. R ELATED ITEMS 8 7 7 B MMC 801 CHANGE TECHNICIAN PASSCODE 2-296 Samsung Business Communications...
  • Page 339: 801] Change Technician Passcode

    System returns to step 2. TECH. PASSCODE NEW CODE:∗∗∗∗ 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 8 8 1 B MMC 800 ENABLE TECHNICIAN PROGRAM Samsung Business Communications 2-297...
  • Page 340: 802] Customer Access Mmc Number

    Left Soft button to return to step 3 to make additional entries. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 8 8 4 B NONE 2-298 Samsung Business Communications...
  • Page 341: 803] Assign Tenant Group

    Right Soft button to return to step 2) C:1 S:2 -03 T:2 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 8 8 7 B NONE Samsung Business Communications 2-299...
  • Page 342: 804] Sys I/O Mode

    B AUD RATE: Transmission time 1 0 8 9 B Option Setting Value 4800 bps 9600 bps 19200 bps 38400 bps C HAR LENGTH: Length of the characters 1 0 9 0 B Option Setting Value 7 bits 8 bits 2-300 Samsung Business Communications...
  • Page 343 19200 bps 19200 bps 19200 bps CHAR LENGTH 8 bits 8 bits 8 bits PARITY NONE NONE NONE RETRY COUNT STOP BIT 1 bit 1 bit 1 bit WAIT 3000 ms 300 sec 30 sec DSR CHECK Samsung Business Communications 2-301...
  • Page 344 [Speaker] button to store the data and execute the programming process for the next program. R ELATED ITEMS 8 9 1 B Program 725 Designate the option for the call information output. 2-302 Samsung Business Communications...
  • Page 345: 805] Tx Level And Gain

    - DOWNLOAD: download adjusted CID TYPE and TX/TX gain to SP When changing the MMC [805] ‘MMC [805] TX LEVEL AND GAIN’ should not be changed from the default levels without the assistance of the local SAMSUNG distributor. Samsung Business Communications 2-303...
  • Page 346 5) (When the TSW GAIN CONTROL is selected) a. Select the TX TWS connect type via dial keypad. TSW GAIN CONTROL SLT DGP :+0.0 Press Volume button to go to the next TX TSW connect type and press Right Soft button. 2-304 Samsung Business Communications...
  • Page 347 SLT ATRK:+1.9 Press Volume button to scroll data and press Right Soft button. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 8 9 4 B NONE Samsung Business Communications 2-305...
  • Page 348: 806] Card Pre-Install

    3) Enter slot number via dial keypad.(e.g., 6) C:1–S:6 16 DLI 16 DLI Press Volume button to make selection and press Right Soft button. 4) Dial 1 for YES to reset card or dial 0 for NO. C:1–S:6 RESET CARD ? 2-306 Samsung Business Communications...
  • Page 349 Press Volume button to make selection and press Right Soft button. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 8 9 7 B MMC 724 DIAL NUMBERING PLAN Samsung Business Communications 2-307...
  • Page 350: 807] Phone Volume Control

    TX/RX COMP MIN RX VOL (in OfficeServ 7100/ OfficeServ 7030) When changing the MMC [807] ‘MMC [807] PHONE VOLUME CONTROL’ should not be changed from the default levels without the assistance of the local SAMSUNG distributor. 2-308 Samsung Business Communications...
  • Page 351 HANDSET TX :6 Press Volume button to make selection and press Right Soft button to save and return to step 3. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. Samsung Business Communications 2-309...
  • Page 352 CHAPTER 2. MMC Programming R ELATED ITEMS 9 0 0 B NONE 2-310 Samsung Business Communications...
  • Page 353: 810] Halt Processing

    Press Volume button to make selection and press Right Soft button to enter and return to step 2. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 0 3 B NONE Samsung Business Communications 2-311...
  • Page 354: 811] Reset System

    5) If clear memory, system will return with default time and date and default extension number. If system just restarted, it will return to normal programmed status. R ELATED ITEMS 9 0 6 B N ONE 2 1 6 B 2-312 Samsung Business Communications...
  • Page 355: Set Country Code

    Selects the country for correct system programming and operation. When changing the MMC [812] ‘MMC [812] SET COUNTRY CODE’ should not be used from the default levels without the assistance of the local SAMSUNG distributor. D EFAULT DATA 9 0 7 B...
  • Page 356: 813] Hotel Operation

    H otel Related MMCs 1 0 9 6 B MMC 221 EXTENSION TYPE MMC 222 FAX PAIR MMC 513 HOTEL TIMER MMC 760 ITEM COST TABLE MMC 761 TAX RATE SETUP MMC 762 ROOM COST RATE 2-314 Samsung Business Communications...
  • Page 357: 815] Customer Database Copy

    A CTION DISPLAY 9 1 4 B 1) Press Transfer button and enter 815. CUST DBASE: MCDB Display shows: S:12/01/01 00:00 If the Media card is in use, the display shows: CUST DBASE: MCDB MEDIA IS BUSY Samsung Business Communications 2-315...
  • Page 358 Right Soft button to make changes and return to ARE YOU SURE?:YES step 9. 11) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 1 5 B NONE 2-316 Samsung Business Communications...
  • Page 359: 816] Conference Gain

    VM. When changing the MMC [816] ‘MMC [816] CONFERENCE GAIN’ is not to correct low volume. To be used with the support of local SAMSUNG Electronics Co. distributor. D EFAULT DATA 9 1 6 B A CTION...
  • Page 360: 818] Program Download

    4) Press Volume button to select YES and LP40 PGM:C press Right Soft button to move cursor. DOWNLOAD NOW?YES 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 2 1 B NONE 2-318 Samsung Business Communications...
  • Page 361: 819] Media Card File Control

    Startup file for OfficeServ 7200 system booting. MPEVxxxx.PGM/ Program for MP40/MCP card. Since the MP40/MCP program is not installed MPPSVxxx.PGM on the MP40/MCP card itself, at least one MP40/MCP program must be included in Media Card to start the system. Samsung Business Communications 2-319...
  • Page 362 Press Volume button to make selection and press Right Soft button to delete file and move cursor step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 2 4 B NONE 2-320 Samsung Business Communications...
  • Page 363: 820] Assign System Link Id

    Right Soft button. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 2 8 B MMC 821 ASSIGN NETWORK TRUNK MMC 823 ASSIGN NETWORK COS Samsung Business Communications 2-321...
  • Page 364 CHAPTER 2. MMC Programming MMC 824 NETWORK DIAL TRANSLATION MMC 830 ETHERNET PARAMETERS 2-322 Samsung Business Communications...
  • Page 365: 821] Assign Network Trunk

    2 for QSIG BASIG 1 or 3 for QSIG BASIC 2. Press Volume button to make selection and press Right Soft button to save and move cursor. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. Samsung Business Communications 2-323...
  • Page 366 CHAPTER 2. MMC Programming R ELATED ITEMS 9 3 1 B NONE 2-324 Samsung Business Communications...
  • Page 367: 822] Virtual Extension Type

    14 buttons phone LARGE SET Large LCD phone 7 BTN LCD 7 buttons LCD phone 0 BTN LCD 0 button LCD phone NONE not used D EFAULT DATA 9 3 2 B 3501-3522: SLT 3401-3440: 21 BTN SET Samsung Business Communications 2-325...
  • Page 368 Press Volume button to make selection and press Right Soft button to save and move cursor. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 3 4 B NONE 2-326 Samsung Business Communications...
  • Page 369: 823] Assign Network Cos

    DNDO CAPABL DNDO Capability Level(0~3) DNDO PROTEC DNDO Protection Level(1~3) PAGE PAGE PATH REPL. Path Replacement PATH RETEN Path Retention C ONDITIONS 9 3 5 B NONE D EFAULT DATA 9 3 6 B SEE DESCRIPTION Samsung Business Communications 2-327...
  • Page 370 Press Volume button to select YES or NO and Press Right Soft button to store data. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 3 8 B MMC 301 ASSIGN STATION COS 2-328 Samsung Business Communications...
  • Page 371: 824] Network Dial Translation

    Right Soft button to move cursor. 6) Enter YES/NO to display other node extension 01:601 60201 in internal extension number format. DISP: MBX:N Press Volume button to select and press Right Soft button to move cursor. Samsung Business Communications 2-329...
  • Page 372 8) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 4 1 B MMC 710 LCR DIGIT TABLE MMC 724 DIAL NUMBERING PLAN MMC 820 ASSIGN SYSTEM LINK ID 2-330 Samsung Business Communications...
  • Page 373: 825] Assign Networking Options

    D EFAULT DATA 9 4 2 B ADD NUMB TO NAME: YES USE REMOTE VM: NO REMOTE VM NUMBER: NONE REMOTE CID NUMB: YES USE REMOTE ATTN: NO REMOTE ATTN NUMB: NONE SPNET DIGIT SEND: MGI SIGNALLING Samsung Business Communications 2-331...
  • Page 374 Press Volume button to select YES/NO and press Right Soft button to mover cursor. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 4 4 B NONE 2-332 Samsung Business Communications...
  • Page 375: 826] Assign System Reference Clock

    Press Volume button to select and Press Right Soft button to store. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 4 6 B NONE Samsung Business Communications 2-333...
  • Page 376: 827] Crm Dsp Mode Select

    5) Dial digit to select CRM mode.(0-2) C:1-LOC:1-DSP:1 DTMFR T MFR Press Volume button to select and press Right Soft button to move cursor. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. 2-334 Samsung Business Communications...
  • Page 377 CHAPTER 2. MMC Programming R ELATED ITEMS 9 5 0 B NONE Samsung Business Communications 2-335...
  • Page 378: 828] Rcm2 Dsp Mode Select

    Press Volume button to select and press Right Soft button to move cursor. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 5 4 B NONE 2-336 Samsung Business Communications...
  • Page 379: 829] Lan Printer Parameters

    FONT TYPE COURIER Font type(0.COURIER, 1.TIMES NEW ROMAN) DUPLEX ENAB FALSE Sets duplex(0. FALSE, 1. TRUE) ORIENTATION PORTRAIT Orientation(0. PORTRAIT, 1. LANDSCAPE) PRINT TRAY DEFAULT Printer tray(0.Default, 1.Tray1, 2.Tray2, 3.Manual) RESOLUTION Resolution(0.300, 1.600) LINE/PAGE Lines per page Samsung Business Communications 2-337...
  • Page 380 Press Volume to select the data and press Right Soft button to move the cursor. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 5 7 B NONE 2-338 Samsung Business Communications...
  • Page 381: 830] Ethernet Parameters

    OfficeServ 7400 only supports EMAIL Server MMS SERVER ADDR Specify an MMS SERVER IP address. OfficeServ 7400 only supports MMS Server MMS WEB SERVER Specify an MMS WEB SERVER IP address. OfficeServ 7400 only supports MMS WEB Server Samsung Business Communications 2-339...
  • Page 382 For example 192.168.1.10 should be entered as: 192 168 001 010. C ONDITIONS 9 5 8 B This MMC must be used if there are ITP phones and/or MGI cards on the system. After changing Ethernet parameters, restart the system to apply the new settings. 2-340 Samsung Business Communications...
  • Page 383 Right Soft button to store and move cursor. ARE YOU SURE? NO 8) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 6 0 B NONE Samsung Business Communications 2-341...
  • Page 384: 831] Mgi Parameters

    MGI card is reset. - When changing any IP address/value, three digits must be entered for each (octet) field. For example, 192.168.1.10 should be entered as 192 168 001 010. 2-342 Samsung Business Communications...
  • Page 385 P ADDRESS 165. 10. 1.100 Press Right Soft button to move cursor. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 6 4 B NONE Samsung Business Communications 2-343...
  • Page 386: 832] Voip Access Code

    NO to disable it. If disabled, then mmc 832/833 will be applied and mmc 837 will not be applied. SIP SIGNAL This indicates the transport type in SIP message signalling. SIP message can be transported either using UDP or TCP. 2-344 Samsung Business Communications...
  • Page 387 CHAPTER 2. MMC Programming URI TYPE This field specifies SIP-URI type in SIP messages. According to SIP standard, this system supports TEL-URI as well as SIP-URI, which is set by default. Samsung Business Communications 2-345...
  • Page 388 Right Soft button to save and move cursor. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 6 7 B MMC 833 VOIP IP TABLE MMC 834 H.323 OPTIONS 2-346 Samsung Business Communications...
  • Page 389 CHAPTER 2. MMC Programming MMC 836 H.323 GATEKEEPER OPTIONS MMC 837 SIP OPTIONS Samsung Business Communications 2-347...
  • Page 390: 833] Voip Ip Table

    Press Speaker button to advance to next MMC entry. R ELATED ITEMS 9 7 0 B MMC 830 ETHERNET PARAMETERS MMC 832 VOIP ACCESS CODE MMC 834 H.323 OPTIONS MMC 837 SIP OPTIONS MMC 838 PRIVATE IP ADDRESSES 2-348 Samsung Business Communications...
  • Page 391: 834] H.323 Options

    CLIR WITH NUMBER When this option is enabled, the CLIP number is DISABLE sent to the network even if the CLIP restriction flag is set. USE OVERLAP DIAL Enables use of overlap dialing. ENBLOC Samsung Business Communications 2-349...
  • Page 392 Press Volume button to make selection and press Right Soft button to move cursor. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 7 3 B NONE 2-350 Samsung Business Communications...
  • Page 393: 835] Mgi Dsp Options

    This option selects retry count of Fax-over-IP if errors are detected. The range is 0~4(0 means no retry). FAX ECM This option selects retry of Fax-over-IP if errors are ENABLE detected. MAX FAX CNT This is the maximum number of channels that can be Samsung Business Communications 2-351...
  • Page 394 CHAPTER 2. MMC Programming simultaneously used for Fax-over-IP. The range is 00~04. 2-352 Samsung Business Communications...
  • Page 395 DTMF TYPE There are two types of DTMF transmission: INBAND, OUTBAND which is industry standard(H.245) type DTMF transport, and OUTBAND which is a Samsung proprietary method. TOS/DifServ An 8-bit binary value that will be used by external All bits 0...
  • Page 396 INBAND in voice, In the voice channel using the voice coding scheme currently in operation, IN- BAND(RFC2833), In the voice channel using program- mable DTMF payload types, following RFC2833, and OUTBAND which is a Samsung proprietary method. SILENCE SUP This parameter determines whether silence suppression DISABLE is used.
  • Page 397 CHAPTER 2. MMC Programming The range is 0~150 ms MAX JITTER Decides the maximum time to consider delay for jitter 150 ms adjustment. The range is 30~200 ms. Samsung Business Communications 2-355...
  • Page 398 This option is enable or disable for 802.1 p/q. (including 802.1 VLAN and 802.1 Prriority) NOTE : These options apply to RTP/RTCP. 802.1 P Set the 802.1 priority. The range is 0~7. 802.1 VLAN Set the VLAN tag. The range is 0~ 4095. 2-356 Samsung Business Communications...
  • Page 399 Right Soft button to save and return to step 3. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 7 6 B MMC 831 MGI PARAMETERS Samsung Business Communications 2-357...
  • Page 400: 836] H.323 Gk Options

    URQ REASON Select ON or OFF for use of Un-register Request MODE RAS(URQ) messages. RRQ FAIL TIME Programs the time frame to re-send Registration 30 seconds Request RAS(RRQ) messages to a gatekeeper. The range is 1~99. 2-358 Samsung Business Communications...
  • Page 401 Right Soft button to save and return step 3. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 7 9 B MMC 834 H.323 OPTIONS Samsung Business Communications 2-359...
  • Page 402: 837] Sip Options

    Agent waits for this length of time. The range is 0~99900 ms. REQ RETRY After sending General Request, the User Agent waits for 5000 ms the Final Response for this length of time. The range is 0~99900 ms. 2-360 Samsung Business Communications...
  • Page 403 REGIST PORT Sets the port to use on the Registrar Server. 5060 OUT PROXY Designates the Domain Name or the IP Address of the NONE SIP Server. If the domain name value is entered here, the Samsung Business Communications 2-361...
  • Page 404 When ALIVE NOTI is set, NOTIFY TIME decides the 1800 sec message sending time interval. EXCLUSIVE When Set to Enable, system will only respond specifically Disable to the enabled SIP server. It will ignore all other SIP 2-362 Samsung Business Communications...
  • Page 405 323 should be entered here. This is only used when MMC 405 value is null. SS TYPE Indicates how SIP call flow will be done; Samsung vs. Standard Standard. When set to Samsung, system will not follow standard SIP call flow that is recommended in RFCs, but instead will initiate Samsung proprietary call flow.
  • Page 406 Right Soft button to move cursor. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 8 2 B MMC 323 CALLING PARTY NUMBER MMC 405 TRUNK CO TEL NUMBER 2-364 Samsung Business Communications...
  • Page 407 CHAPTER 2. MMC Programming MMC 306 TRUNK RING ASSIGNMENT MMC 714 DID NUMBER AND NAME TRANSLATION MMC 724 DIAL NUMBERING PLAN MMC 832 VOIP ACCESS CODE MMC 834 H.323 OPTIONS Samsung Business Communications 2-365...
  • Page 408: 838] Private Ip Addresses

    4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC entry. R ELATED ITEMS 9 8 5 B MMC 830 ETHERNET PARAMETERS MMC 832 VOIP ACCESS CODE MMC 834 H.323 OPTIONS MMC 837 SIP OPTIONS 2-366 Samsung Business Communications...
  • Page 409: 839] Sip User

    When dialed number is matched with TEL NO in this ta- ble, this specifies the SIP CARRIER to which outbound message is transferring. C ONDITIONS 9 8 6 B None D EFAULT DATA 9 8 7 B None Samsung Business Communications 2-367...
  • Page 410 5) Press the [Transfer] button to store the data and com- plete the procedure, Or press the [Speaker] button to store the data. R ELATED ITEMS 9 8 9 B Program 837 Designate the SIP option. 2-368 Samsung Business Communications...
  • Page 411: 840] Ip Phone Information

    [ 840] IP PHONE INFORMATION 2 4 2 B This MMC provides a means to register IP phones with the OfficeServ 7000 Series system. During registration, the IP and MAC addresses are also registered. The User ID and Pass- word must match the table entry in this MMC for the IP phone to be registered. The system default phone numbers are 3201~3299 and default User IDs match the default station num- bers.
  • Page 412 (H.263/MPEG4) VIDEO SIZE Designate the video input/output format of the codec of the VIDEO IP phone. (CIF, QCIF) QoS ENABLE Designate whether to use the QoS. DISABLE D EFAULT DATA 9 9 0 B SEE DESCRIPTION 2-370 Samsung Business Communications...
  • Page 413 Press Speaker button to advance to next MMC. R ELATED ITEMS 9 9 2 B MMC 615 MGI GROUP MMC 616 MGI USER MMC 830 ETHERNET PARAMETERS MMC 831 MGI PARAMETERS MMC 835 MGI DSP OPTIONS MMC 841 SYSTEM IP OPTIONS Samsung Business Communications 2-371...
  • Page 414: 841] System Ip Options

    CHAPTER 2. MMC Programming [ 841] SYSTEM IP OPTIONS 2 4 3 B This MMC provides various proprietary Samsung VoIP and IP integration options. The options set in this MMC apply system wide. Option Description Default PHONE VERSION Sets running IP-based phone and new phone software 0000 version with the system.
  • Page 415 ITP TX GAIN/HSET Sets IP-based phone Handset TX gain value of LEVEL 1: 25 each level. LEVEL 2: 27 LEVEL 3: 29 LEVEL 4: 31 LEVEL 5: 33 LEVEL 6: 35 LEVEL 7: 37 LEVEL 8: 39 Samsung Business Communications 2-373...
  • Page 416 MMC COMMAND: IP-based phone software COMMAND upgraded manually in MMC 840. b) PHONE CON: IP-based phone software up- graded automatically when phone connected. c) AUTO TIME: IP-based phone software up- graded automatically at set time. 2-374 Samsung Business Communications...
  • Page 417 - MAX COUNT: Number of the SIP Stack allowed in the license * The followings are the items which can be desig- nated within the number of the available SIP Stack. Namely, the followings are the functions which use the Samsung Business Communications 2-375...
  • Page 418 FREE COUNT number. - SIP PHONE: The number of the SIP STACK which is to be used by the Samsung standard SIP terminal can be designated within the FREE COUNT number. - WIP PHONE: The number of the SIP STACK which is to be used by the WIP terminal can be designated within the FREE COUNT number.
  • Page 419 Press Right Soft button to save and return to step 3. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 9 5 B MMC 840 IP PHONE INFORMATION Samsung Business Communications 2-377...
  • Page 420: 842] Sip Station Information

    CHAPTER 2. MMC Programming [ 842] SIP STATION INFORMATION 2 4 4 B This MMC provides a means of registering the SIP with the OfficeServ 7000 series system. Parameter Description REGISTERED This indicates whether the corresponding standard SIP terminal is registered.
  • Page 421 U BLIC Press Right Soft button to save and return to step 3. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 9 9 8 B NONE Samsung Business Communications 2-379...
  • Page 422: 845] Wlan Parameters

    RF CHANNEL Set a RF CHANNEL value that can be used by USE CH 1: 01 WBS. USE CH 2: 06 USE CH 3: 11 USE CH 4: 00 USE CH 5: 00 USE CH 6: 00 2-380 Samsung Business Communications...
  • Page 423 DEFAULT TIME ZONES Time zone service for each WBS 00:00 PARA CLR Initializes WBS registration data. WBS NAME It is available to enter the name corresponding to NONE each WBS. Maximum 11 characters can be en- Samsung Business Communications 2-381...
  • Page 424 Default(ms) IP ADDRESS IP address of WLI Card 0.0.0.0 GATEWAY Gateway address of WLI Card 0.0.0.0 NET MASK NET MASK of WLI Card 255.255.255.0 VERSION Version of WLI Card SLOT INFO Slot information of WLI Card 2-382 Samsung Business Communications...
  • Page 425 WLAN: RF CHANNEL can be used for a system. USE CH 1: 01 (Default RF channel: 1, 6, 11) Used to change the TX POWER of all WBS. WLAN: WBS TX PWR (Default: LEVEL 1~4) DEFAULT Samsung Business Communications 2-383...
  • Page 426 The initial re-transmission time if no answer, 000500MS based on the RFC2543 specification. The range is 0-9900 ms.(Default: 500 ms) Register the RE-TRANS T2. SIP : RE-TRANS T2 The maximum re-transmission time if no answer, 004000MS 2-384 Samsung Business Communications...
  • Page 427 Timeout ends. The range is 0-999900 ms.(Default: 180000 ms) R ELATED ITEMS 1 0 0 1 B MMC 846 WIP INFORMATION MMC 847 WLAN RESET AND STATUS CHECK MMC 848 WLAN IP/MAC LIST MMC 849 WLAN CONFIGURATION Samsung Business Communications 2-385...
  • Page 428: 846] Wip Information

    DELTA, WLAN phone will start to hand- over. In this case the signal level of WLAN phone should be under the Thresh Hold. HO SCAN Handover Scan Time Value (0~99) SCAN Time is a period of scanning for WLAN Handover. 2-386 Samsung Business Communications...
  • Page 429 [3301] REGISTERED Press Volume button to select station and press Right Soft button to move cursor. 3) Set the items below at the menu. Confirm the status of terminal registration for each [3301] REGISTERED phone number. Samsung Business Communications 2-387...
  • Page 430 Register the HO DELTA of the terminal. [ 3301] HO DELTA Register the HO SCAN of the terminal. [ 3301] HO SCAN R ELATED ITEMS 1 0 0 4 B MMC 847 WLAN RESET AND STATUS CHECK 2-388 Samsung Business Communications...
  • Page 431 CHAPTER 2. MMC Programming MMC 848 WLAN IP/MAC LIST MMC 849 WLAN CONFIGURATION Samsung Business Communications 2-389...
  • Page 432: 847] Wlan Reset And Status Check

    6) To verify the status of the WLI or WBS, select 1. STATUS: WLI C1S1 OFF STATUS: CWBS:01 Y N N N N N N N R ELATED ITEMS 1 0 0 7 B MMC 846 WIP INFORMATION MMC 848 WLAN IP/MAC LIST MMC 849 WLAN CONFIGURATION 2-390 Samsung Business Communications...
  • Page 433: 848] Wlan Ip/Mac List

    5) A number next to USED indicates the terminal num- IP:001 USED:3301 ber to which the IP ADDRESS was assigned. 168.219.149. 5 R ELATED ITEMS 1 0 1 0 B MMC 846 WIP INFORMATION MMC 847 WLAN RESET AND STATUS CHECK MMC 849 WLAN CONFIGURATION Samsung Business Communications 2-391...
  • Page 434: 849] Wlan Configuration

    3) Select ENABLE to register a terminal. REGISTER VoWLAN ENABLE 4) Select WIP REGIST CLEAR to clear the registration WIP REGIST CLEAR status for a terminal. 3301:FORCED 5) Select the WEP KEY setting when ENCRYPTION WBS WEP SERVICE is selected. DISABLE 2-392 Samsung Business Communications...
  • Page 435 COMBO AP SELECT AP TYPE RESET SYSTEM?NO R ELATED ITEMS 1 0 1 3 B MMC 846 WIP INFORMATION MMC 847 WLAN RESET AND STATUS CHECK MMC 848 WLAN IP/MAC LIST Samsung Business Communications 2-393...
  • Page 436: 850] System Resource Display

    2) Enter the option number.(0-3) CID DSP’S USE:000 FREE:014 Press Volume button to select. 3) Press Transfer button to save and exit. Press Speaker button advance to next MMC. R ELATED ITEMS 1 0 1 6 B NONE 2-394 Samsung Business Communications...
  • Page 437: 851] Alarm Reporting

    1) Press Transfer button and enter 851. SYS ALARM REPORT Display shows: I EW ALARMS 2) Enter desired option. SYS ALARM REPORT I EW ALARMS Press Volume button to make selection and press Right Soft button to move cursor. Samsung Business Communications 2-395...
  • Page 438 Press Right Soft button to return to step 2. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 1 0 1 9 B MMC 852 SYSTEM ALARM ASSIGNMENTS 2-396 Samsung Business Communications...
  • Page 439: 852] System Alarm Assignments

    Alarm data = Cabinet(1, 2 or 3) MJA06 PCM Switching A fault has occurred in the Switching Control Alarm data = MCP BASE, ESM: 1, ESM: 2 or ESM: 3 MJA08 FAN Out of A FAN does not work. Order Samsung Business Communications 2-397...
  • Page 440 The WLI card has blocked because the system detects the card does not work correctly. Alarm data = Cabinet, Slot(Cx-Syy) MJD-- DTRK Error ISDN or E1 card Fault MJD01 Sync Failure Clocking on TEPRI cards has become asynchronous. 2-398 Samsung Business Communications...
  • Page 441 The PRI card has restarted. Alarm Data = Cabinet, Slot(Cx-Syy) MJD20 BRI Restart The BRI card has restarted. Alarm Data = Cabinet, Slot(Cx-Syy) MJD21 PCM Loss Loss of PCM coding on a digital facility. Alarm Data = Cabinet, Slot(Cx-Syy) Samsung Business Communications 2-399...
  • Page 442 A circuit card mounted in a universal slot has been re- turned to service. Alarm Data = Cabinet, Slot(Cx-Syy) MNF04 Trunk Fault Out of service trunk detected via loop detect. Internal CO- DEC test. Alarm Data = Cabinet, Slot, Port(Cx-Syy-Pzz) 2-400 Samsung Business Communications...
  • Page 443 MNF34 SVMi Ready End SVMi Card Ready end MNF35 SVMi Request SVMi Card Request end MNF36 SVMi HDD Alarm SVMi Card HDD Alarm MNF37 Manual Reset Card Manual Reset Request MNF38 Card Active Card Active notification Samsung Business Communications 2-401...
  • Page 444 An entry will return the cursor to step 2. Press Volume buttons to make selection and press Right Soft button to save and return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. 2-402 Samsung Business Communications...
  • Page 445 CHAPTER 2. MMC Programming R ELATED ITEMS 1 0 2 2 B MMC 501 SYSTEM TIMERS MMC 722 STATION KEY PROGRAMMING MMC 723 SYSTEM KEY PROGRAMMING MMC 851 ALARM REPORTING MMC 853 MAINTENANCE BUSY Samsung Business Communications 2-403...
  • Page 446: 853] Maintenance Busy

    DTMFR/CID/R2MFC DSP If DTMFR, CID or R2MFC is selected when DSP is not mounted, display will show NONE. If mounted, display will show IDLE by default. D EFAULT DATA 1 0 2 3 B ALL IDLE 2-404 Samsung Business Communications...
  • Page 447 Right Soft button to save and return step 3. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 1 0 2 5 B MMC 851 ALARM REPORTING MMC 852 SYSTEM ALARM ASSIGNMENTS Samsung Business Communications 2-405...
  • Page 448: 854] Diagnostic Time

    5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 1 0 2 8 B MMC 851 ALARM REPORTING MMC 852 SYSTEM ALARM ASSIGNMENTS MMC 853 MAINTENANCE BUSY 2-406 Samsung Business Communications...
  • Page 449: 855] Display System Options

    2) Press Volume button to view options. SYSTEM OPTIONS 1 -LP CONN :YES 3) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 1 0 3 0 B NONE Samsung Business Communications 2-407...
  • Page 450: 856] Tech Programming Logs

    3203 :11/22 13:30 Press Volume button to scroll. 3) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 1 0 3 3 B MMC 800 ENABLE TECHNICIAN PROGRAM 2-408 Samsung Business Communications...
  • Page 451: 857] Virtual Cabinet Set

    C4S01 ~ C4S08 BRI STN C5S04 ~ C5S07 C4S01 ~ C4S08 GCONF STN C5S04 ~ C5S08 WIRED ITP C4S01 ~ C5S03 SPNET TRK C5S06 ~ C5S12 WLAN ITP C4S07 ~ C4S10 SIP TRK C5S09 ~ C5S12 Samsung Business Communications 2-409...
  • Page 452 CHAPTER 2. MMC Programming SIP STN C4S07 ~ C4S10 H323 TRK C5S11 ~ C5S12 IP UMS C4S07 ~ C4S10 2-410 Samsung Business Communications...
  • Page 453 WLAN ITP WLAN ITP WIRED ITP BRI STN WIRED ITP BRI STN WIRED ITP GCONF STN WIRED ITP GCONF STN WIRED ITP SPNET TRK WIRED ITP SPNET TRK WIRED ITP SIP TRK WIRED ITP H323 TRK Samsung Business Communications 2-411...
  • Page 454 WIRED ITP BRI STN WIRED ITP BRI STN WIRED ITP GCONF STN WIRED ITP SPNET TRK WLAN ITP SPNET TRK WLAN ITP SIP TRK WLAN ITP SIP TRK WIRED ITP H323 TRK WIRED ITP H323 TRK 2-412 Samsung Business Communications...
  • Page 455 Right soft botton. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 1 0 3 6 B MMC 724 NUMBER PLAB MMC 822 VIR.EXT TYPE Samsung Business Communications 2-413...
  • Page 456: 859] Hardware Version Display

    1 1 1 7 B Option Description MP40 CARD Shows the EPLD/PCB version of MCP. Cx M-BOARD Shows the Mother board and EPLD/PCB version cabinet #x. Cx LP CARD Shows the LP and EPLD/PCB version of cabinet #x. 2-414 Samsung Business Communications...
  • Page 457 2) Enter the option number. EPLD/PCB VERSION 1 M-BOARD :V11 Press Volume button to scroll. 3) Press Transfer button to save and exit. Press Speaker button advance to next MMC. R ELATED ITEMS 1 0 3 9 B NONE Samsung Business Communications 2-415...
  • Page 458: 861] System Options

    Decides whether LB port of MISC card is used as ROP port or not. (OfficeServ 7100/ OfficeServ 7030 does not support this function) LP TRK TONE DISC When this option is set to ON, loop trunk can be disconnected by detecting busy tone. 2-416 Samsung Business Communications...
  • Page 459 3) Enter 1 or 0 to enable or disable. U TO UPDATE TIME ENABLE Press Volume button to select and press Right Soft button to store. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. Samsung Business Communications 2-417...
  • Page 460 ASSIGN DATE AND TIME MMC 606 ASSIGN SPEED DIAL BLOCK MMC 705 SYSTEM SPEED DIAL MMC 706 SYSTEM SPEED DIAL BY NAME MMC 722 STATION KEY PROGRAMMING MMC 723 SYSTEM KEY PROGRAMMING MMC 302 PICKUP GROUP 2-418 Samsung Business Communications...
  • Page 461: 863] System Node Information

    [ 863] SYSTEM NODE INFORMATION 2 6 0 B This MMC is the program that specifies the system information of SPNET(Samsung Proto- col Networking). It is useful when many systems are consisted through SPNET and inter- locked with LCR. There are maximum 2000 entries.
  • Page 462 CHAPTER 2. MMC Programming R ELATED ITEMS 1 0 4 5 B MMC 710 LCR DIGIT 2-420 Samsung Business Communications...
  • Page 463: 865] Fan Power Control

    2 6 2 B Assigns the digit translation table used per remote stations for networking. And the maxinum value of the remote station is 2000 and it can be assinged in MMC724 (‘REMOTE STN NUMB’ option) Samsung Business Communications 2-421...
  • Page 464 Right Soft button to move cursor. DGP: 0 22201 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 1 0 5 2 B MMC724 NUMBER PLAN MMC824 NTWK LCR DGT 2-422 Samsung Business Communications...
  • Page 465: 889] Display Server Status

    1 ) 11/11 11:10 CONN-FEAT SERVER 3) Press Transfer button to save and exit. 2 ) 11/13 11:20 CONN-FEAT SERVER Press Speaker button to advance to next MMC. R ELATED ITEMS 1 0 5 5 B NONE Samsung Business Communications 2-423...
  • Page 466: Initialize Port

    Right Soft button to save and return to step 2. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. R ELATED ITEMS 1 0 5 8 B NONE 2-424 Samsung Business Communications...
  • Page 467 Cell Completion on No Reply Caller Identification Call Line Identification Communication Class Of Service CPLD Complex Programmable Logic Device Cyclic Redundancy Code CR Mode Constant Resistance Mode Communication Service Unit Computer Telephony Integration CWBS Combo Wireless Base Station(Access Point) Samsung Business Communications...
  • Page 468 High level Data Link Control Home Location Register HTML Hypertext Markup Language HTTP Hypertext Transfer Protocol Identification Intrusion Detection System IGMP Internet Group Management Protocol IMAP Internet Messaging Access Protocol IN-SCP Intelligent Network Service Control Point Input/Output Module Samsung Business Communications...
  • Page 469 Media Gateway Control Multi Frequency Module Media Gateway Media Gateway Controller Media Gateway Interface MGCP Media Gateway Control Protocol MISC Miscellaneous Function Module Man Machine Communication MWSLI Message Waiting Single Line Interface Network Address Translation Network Management System Samsung Business Communications...
  • Page 470 R2/CID Module Routing Information Protocol RTCP Real-time Transmission Control Protocol Real-time Transmission Protocol Switch and Conference Module Signal Control Processor Session Description Protocol Signalling Gateway SGCP Simple Gateway Control Protocol SIGTRAN Signalling Transport Serial Input/Output Session Initiation Protocol Samsung Business Communications...
  • Page 471 Single Line Telephone SMDR Station Message Detail Recording SMTP Simple Mail Transfer Protocol Server optimized Linux Spanning Tree Algorithm Signalling Transfer Point SVMi Samsung Voice Mail(integrated) TAPI Telephony Application Programming Interface TCAP Transmission Control Application Part Transmission Control Protocol TEPRI T1E1PRI Trunk...
  • Page 472 ABBREVIATION Wide Area Network Wireless Base Station WAN Interface Module Wireless LAN Interface xDSL x-Digital Subscriber Line Samsung Business Communications...
  • Page 473: Programming Guide

    Programming Guide ©2005 ~ 2007 Samsung Electronics Co., Ltd. All rights reserved. Information in this giude is proprietary to SAMSUNG Electronics Co., Ltd. No information contained here may be copied, translated, tran- scribed or duplicated by any form without the prior written con- sent of SAMSUNG.