861] System Options - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 861] SYSTEM OPTIONS

2 5 9 B
Sets a number of system options.
D EFAULT DATA
1 0 4 0 B
AUTO UPDATE TIME: DISABLE
SYSTEM SPEED BIN: MAX 500
IDLE WHEN ENBLOC: DISABLE
2 LINE ENBLOCK: DISABLE
2 ZONE EXT PAGE: DISABLE
USE LB FOR PAGE: NONE
LP TRK TONE DISC: DISABLE
ISDN SS FEATURE: DISABLE
SPNET OVERLAP: DISABLE
SPNET CLI TABLE: NONE
E-LCR CLI TABLE: NONE
EXTERNAL BGM/MOH: INT.CHIME
LCP CABINET TYPE: 0
MAX CHAIN FWDALL: 1
PINGRING SERVICE: DISABLE
No
1 AUTO UPDATE TIME
2 SYSTEM SPPED BIN
3 IDLE WHEN ENBLOC
4 2 LINE ENBLOCK
5 2 ZONE EXT PAGE
6 USE LB FOR PAGE
7 LP TRK TONE DISC
2-416
Option
Sets enable(1) or disable(0) the system automatically time and
date update from ISDN call connection message. If sets enable,
when system receives ISDN call connection message, system
checks valid data of encapsulated time and date, and update
system time and date device.
Sets max 500(0) or max 950(1) for the maximum number of sys-
tem speed dial bin.
Decides the state of Large LCD Phone treated as idle or busy
when the user of Large LCD Phone is dialling in ENBLOCK
mode.
Decides the usage of ENBLOCK mode for 2 line LCD Phone with
navigation buttons.
Decides whether 2 Zone external paging is enabled or not.
(OfficeServ
Decides whether LB port of MISC card is used as ROP port or
not. (OfficeServ
function)
When this option is set to ON, loop trunk can be disconnected by
detecting busy tone.
Description
7100/ OfficeServ 7030 does not support this function)
7100/ OfficeServ 7030
Samsung Business Communications
does not support this