821] Assign Network Trunk - Samsung OfficeServ 7000 Series Programming Manual

[ 821] ASSIGN NETWORK TRUNK

2 2 3 B
Assigns the Q-signalling PRI trunk for networking
linked with other PBX systems.
Option
NORMAL TRUNK
QSIG TRUNK
QSIG BASIC 1
QSIG BASIC 2
D EFAULT DATA
9 2 9 B
NORMAL
MMC [821]
This MMC is not shown in OfficeServ OfficeServ 7030. OfficeServ 7030 does not
support PRI.
A CTION
9 3 0 B
1) Press Transfer button and enter 821.
Display shows:
2) Enter first trunk number of PRI card.
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
3) Enter 0 for NORMAL TRUNK, or 1 for QSIG
TRUNK
or 2 for QSIG BASIG 1 or 3 for QSIG BASIC 2.
Or
Press Volume button to make selection and
press Right Soft button to save and move cursor.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
Samsung Business Communications
It is assigned data on a per-TEPRI card basis.
Alssigns the normal PRI turnk.
Assigns the Q-signalling PRI trunk for networking between OfficeServ
Systems
Assigns the Q-signalling PRI trunk for networking between OfficeServ
System and the other system. It supports only basic functions
Assigns the Q-signalling PRI trunk for networking between OfficeServ
System and the other system. It can support caller ID.
CHAPTER 2. MMC Programming
and let the Q-signalling PRI trunk be
Description
DISPLAY
[701] Q-SIG TRK
NORMAL TRUNK
[701] Q-SIG TRK
NORMAL TRUNK
[701] Q-SIG TRK
QSIG TRUNK
2-323