724] Dial Numbering Plan - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 724] DIAL NUMBERING PLAN

1 8 3 B
This MMC allows the technician to change directory numbers for stations, trunks, station
groups, trunk groups and feature access codes. The system can be pre-programmed with
default 3- or 4-digit numbering for stations, station groups and trunk numbers depending
on the position of the DIP switches on the MCP card. There is an error message provided to
prevent the accidental duplication of a directory number or feature access code.
No Type of Dial No
00 STN DIAL NO.
01 TRK DIAL NO.
03 MISC DIAL NO.
04 STNG DIAL
NUMBER
05 TRKG DIAL
NUMBER
06 FEAT DIAL NUMBER
07 S0 STN DIAL NO.
09 NTWK LCR DIAL NO
2-252
This is where station directory numbers are changed or assigned.
This is where trunk directory numbers are changed or assigned.
This is where directory numbers for relays, MOH ports and the
alarm sensor are changed or assigned.
This is where station group numbers are changed or assigned.
This is where trunk group numbers are changed or assigned.
This is where feature access codes are changed or assigned. Dial-
ling codes are entered via the dial keypad by pressing a number
the required number of times to select the feature. For example, for
OHVA, the number 6 would be pressed three times.
Please remember that this program is system-wide.
This is where directory numbers for BRI station ports are changed
or assigned.
This is where additional LCR access codes are entered if two or
more OfficeServ 7000 Series systems are networked together.
Description
Samsung Business Communications