Samsung OfficeServ 7000 Series Programming Manual page 290

CHAPTER 2. MMC Programming
LANREQ LAN REQUEST
(OfficeServ 7100
7030
key)
LCR LEAST COST ROUTING
LISTN GROUP LISTENING
LNR LAST NUMBER REDIAL
LOG CALL LOGGING
MMPA MEET ME PAGE ANSWER
D EFAULT DATA
7 8 7 B
For phones, buttons 1 and 2 are set as CALL buttons by default.(Other settings depend on
the keyset type.) For AOMs, all buttons are set as DSS buttons by default.
A CTION
7 8 8 B
1) Press Transfer button and enter 722.
Display shows:
2) Enter selected station number.(e.g., 205)
OR
Press Volume button to select station and press
Right Soft button to move cursor.
3) Enter selected key number.(e.g., 18)
OR
Press Volume button to select key number and
press Right Soft button to move cursor.
4) Using table above, press dial keypad to select
number.
OR
Press Volume button to make selection and press
Right Soft button to advance cursor to step 5 to
enter extender, if required, or to return to step 2.
5) Enter extender if required.(e.g., 03)
OR
Press Volume button to make selection and press
Right Soft button to return to step 2.
2-248
/ OfficeServ
does not support this
VT VOICEMAIL TRANSFER
WAKEUP WAKE UP(Hotel Feature)
XCHIN EXPRESS CHECK IN
(Hotel Feature)
[201] KEY (MAST)
01:CALL1
[205] KEY (MAST)
01:CALL1
[201] KEY (MAST)
18:NONE _
[201] KEY PROG.
18:NONE GPIK_
[201] KEY PROG.
18:NONE GPIK03
Samsung Business Communications
DISPLAY